www. .
English (original instructions) 4 Copyright DEWALT 2
Figure 1 d e f g c b a i DCD920 h d e f g c b a i DCD925 1
Figure 2 k j l Figure 3 B A Figure 5 Figure 4 2 Figure 6 e e f f g g
Figure 7 Figure 9 Figure 8 d Figure 10 h i 3
EN GLI S H 1/2" (13 mm) CORDLESS DRILL/DRIVER DCD920, DCD930, DCD940 1/2" (13 mm) CORDLESS HAMMERDRILL/DRIVER DCD925, DCD935, DCD945 Congratulations! You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. Technical Data Voltage Type Battery Type Power output No-load speed 1st gear 2nd gear 3rd gear Impact rate 1st gear 2nd gear 3rd gear Max.
ENGLISH Vibration emission value ah Screwdriving ah,D = Uncertainty K = m/s² m/s² < 2.5 1.5 < 2.5 1.5 WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. VDC Ah kg Charger Mains voltage Battery type Approx.
EN GLI S H These products also comply with Directive 2004/108/EC and 2011/65/EU. For more information, please contact DEWALT at the following address or refer to the back of the manual. The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of DEWALT. b) c) d) Horst Grossmann Vice President Engineering and Product Development DEWALT, Richard-Klinger-Straße 11, D-65510, Idstein, Germany 30.07.
ENGLISH g) parts. Loose clothes, jewellery or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4) POWER TOOL USE AND CARE a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
EN GLI S H Residual Risks The following risks are inherent to the use of percussion drills: – Injuries caused by touching the rotating parts or hot parts of the tool. In spite of the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These are: – Impairment of hearing. – Risk of squeezing fingers when changing accessories. – Health hazards caused by breathing dust developed when working in wood.
ENGLISH • Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk. • NEVER attempt to connect 2 chargers together. • The charger is designed to operate on standard 230V household electrical power. Do not attempt to use it on any other voltage. This does not apply to the vehicular charger. SAVE THESE INSTRUCTIONS Chargers The DE9116 charger accepts 7.2–18 V NiCd and NiMH batteries.
EN GLI S H into charger. Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped, run over or damaged in any way (i.e., pierced with a nail, hit with a hammer, stepped on). Electric shock or electrocution may result. Damaged battery packs should be returned to a service centre for recycling. CAUTION: When not in use, place tool on its side on a stable surface where it will not cause a tripping or falling hazard.
ENGLISH Battery charged. 1 Charger 1 Side handle Battery defective. 1 Instruction manual 1 Exploded drawing Hot/cold pack delay. Do not probe with conductive objects. Do not charge damaged battery packs. Use only with DEWALT battery packs; others may burst, causing personal injury and damage. NOTE: Battery packs and chargers are not included with N-models. • Check for damage to the tool, parts or accessories which may have occurred during transport.
EN GLI S H Your DEWALT charger is double insulated in accordance with EN 60335; therefore no earth wire is required. If the supply cord is damaged, it must be replaced by a specially prepared cord available through the DEWALT service organisation. Mains Plug Replacement (U.K. & Ireland Only) If a new mains plug needs to be fitted: • Safely dispose of the old plug. • Connect the brown lead to the live terminal in the plug. • Connect the blue lead to the neutral terminal.
ENGLISH NOTE: The first time the tool is run after changing the direction of rotation, you may hear a click on start up. This is normal and does not indicate a problem. driven. To select any of the numbers, rotate until the desired number aligns with the arrow. Worklight (fig. 1) The three-speed feature of your tool allows you to shift gears for greater versatility. To select speed 1 (highest torque setting), turn the tool off and permit it to stop. Slide the gear shifter (g) all the way forward.
EN GLI S H OPERATION Instructions for Use WARNING: Always observe the safety instructions and applicable regulations. WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/installing attachments or accessories. Proper Hand Position (fig. 10) WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown in figure 10.
ENGLISH WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury. Consult your dealer for further information on the appropriate accessories. Protecting the Environment Separate collection. This product must not be disposed of with normal household waste. The charger and battery pack are not serviceable. There are no serviceable parts inside.
EN GLI S H GUARANTEE DEWALT is confident of the quality of its products and offers an outstanding guarantee for professional users of the product. This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
17
Belgique et Luxembourg België en Luxemburg Black & Decker - DEWALT Nieuwlandlaan 7, IZ Aarschot B156 B-3200 Aarschot Danmark DEWALT Sluseholmen 2-4 2450 København SV Tlf: 70201511 Fax: 70224910 www.dewalt.dk Deutschland DEWALT Richard Klinger Str. 11 65510 Idstein Tel: 06126-21-1 Fax: 06126-21-2770 www.dewalt.de Ελλάς Black & Decker (Ελλάς) Α.Ε. Στράβωνος 7 & Βουλιαγμένης 159 Γλυφάδα 16674, Αθήνα España DEWALT Parque de Negocios “Mas Blau” Edificio Muntadas, c/Bergadá, 1, Of.
