www. .
Copyright DEWALT 2
Figure 1 d f e g c b a i DCD920 h d e f g c b a i DCD925 1
Figure 2 k j l Figure 3 B A Figure 5 Figure 4 2 Figure 6 e e f f g g
Figure 7 Figure 8 Figure 9 Figure 11 Figure 12 d Figure 10 m Figure 13 h i 3
EN GLI S H 1/2" (13 mm) CORDLESS DRILL/DRIVER DCD920, DCD930, DCD940 1/2" (13 mm) CORDLESS HAMMERDRILL/DRIVER DCD925, DCD935, DCD945 Congratulations! You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. Technical Data Voltage Type Battery Type Power output No-load speed 1st gear 2nd gear 3rd gear Impact rate 1st gear 2nd gear 3rd gear Max.
ENGLISH Vibration emission value ah Screwdriving ah,D = Uncertainty K = m/s² m/s² < 2.5 1.5 < 2.5 1.5 WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. VDC Ah kg Charger Mains voltage Battery type Approx.
EN GLI S H 2006/42/EC (from Dec. 29, 2009), EN 60745-1, EN 60745-2-1, EN 60745-2-2. These products also comply with Directive 2004/108/EC. For more information, please contact DEWALT at the following address or refer to the back of the manual. b) The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of DEWALT. c) d) Horst Grossmann Vice President Engineering and Product Development DEWALT, Richard-Klinger-Straße 11, D-65510, Idstein, Germany 30.07.
ENGLISH f) g) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4) POWER TOOL USE AND CARE a) Do not force the power tool. Use the correct power tool for your application.
EN GLI S H • Hammer bits and tools get hot during operation. Wear gloves when touching them. Residual Risks The following risks are inherent to the use of percussion drills: – Injuries caused by touching the rotating parts or hot parts of the tool. In spite of the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These are: – Impairment of hearing. – Risk of squeezing fingers when changing accessories.
ENGLISH • Do not disassemble charger; take it to an authorized service center when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire. • Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk. • NEVER attempt to connect 2 chargers together. • The charger is designed to operate on standard 230V household electrical power.
EN GLI S H • Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 40˚ C (105° F) (such as outside sheds or metal buildings in summer). DANGER: Never attempt to open the battery pack for any reason. If battery pack case is cracked or damaged, do not insert into charger. Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped, run over or damaged in any way (i.e.
ENGLISH Labels on Charger and Battery Pack Package Contents In addition to the pictographs used in this manual, the labels on the charger and the battery pack show the following pictographs: The package contains: Read instruction manual before use. 1 cordless percussion drill (DCD945, DCD935, DCD925 models) 1 cordless midhandle drill driver (DCD940, DCD930, DCD920 models) 1 Li-Ion battery pack (L1 models) Battery charging.
EN GLI S H DO NOT use under wet conditions or in presence of flammable liquids or gases. These drills/drivers/hammerdrills are professional power tools. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool. Electrical Safety The electric motor has been designed for one voltage only. Always check that the battery pack voltage corresponds to the voltage on the rating plate.
ENGLISH If model is not equipped with side handle, grip drill with one hand on the handle and one hand on the battery pack. NOTE: Side handle comes equipped on all models. Forward/Reverse Control Button (fig. 1) NOTE: The torque adjustment collar may be set to any number at any time. However, the torque adjustment collar is only engaged during screwdriving mode and not in drill and hammerdrill modes. HAMMERDRILLING (FIG.
EN GLI S H KEYLESS SINGLE SLEEVE CHUCK (FIG. 7–9) DCD940, DCD930, DCD920 Your tool features a keyless chuck with one rotating sleeve for one-handed operation of the chuck. To insert a drill bit or other accessory, follow these steps. 1. Lock the trigger in the OFF position. Turn off tool and disconnect tool from power source. 2. Grasp the black sleeve of the chuck (d) with one hand and use the other hand to secure the tool as shown in Figure 7.
ENGLISH collar (e) at a lower setting to ensure the fastener to be set to your specification. NOTE: Use the lowest torque setting required to seat the fastener at the desired depth. The lower the number, the lower the torque output. Lubrication Your power tool requires no additional lubrication. 2. Rotate the mode control collar (f) so the screw symbol is aligned with the arrow. 3. Reset the torque adjustment collar (e) to the appropriate number setting for the torque desired.
EN GLI S H Should you find one day that your DEWALT product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection. Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.
17
Belgique et Luxembourg België en Luxemburg Black & Decker - DEWALT Nieuwlandlaan 7, IZ Aarschot B156 B-3200 Aarschot Tel: +32 (0)015 - 15 47 9211 Fax: +32 (0)015 - 15 47 9210 www.dewalt.be Danmark DEWALT Sluseholmen 2-4 2450 København SV Tlf: 70201511 Fax: 70224910 www.dewalt.dk Deutschland DEWALT Richard-Klinger-Straße 65510 Idstein Tel: 06126-21-1 Fax: 06126-21-2770 www.dewalt.de Ελλάς Black & Decker (Hellas) S.A.