DCF887 FINAL PRINT SIZE: 148 x 210mm (A5)
English (original instructions) 3 Copyright DeWALT B
Figure 1 C D G B A J H K I E F L I Figure 2 F E M 1
Figure 4 Figure 3 K Figure 5 Figure 6 C D 2 C D
English BRUSHLESS CORDLESS COMPACT IMPACT DRIVER DCF887 Congratulations! You have chosen a DeWALT tool. Years of experience, thorough product development and innovation make DeWALT one of the most reliable partners for professional power tool users. Technical Data Voltage Type Battery type Power output No load speed Mode 1 Mode 2 Mode 3 Impact rate Max torque Tool holder Weight (without battery pack) VDC W rpm ipm Nm kg DCF887 18 1/10 Li-Ion 400 0–1000 0–2800 0–3250 0–3800 205 6.35 mm (1/4") 0.
English Charger Mains voltage Battery type Approx. charging time of battery packs Weight VAC min kg Charger Mains voltage Battery type Approx. charging time of battery packs VAC min DCB113 230 10.8/14.4/18 Li-Ion 30 (1.3 Ah) 35 (1.5 Ah) 50 (2.0 Ah) 70 (3.0 Ah) 100 (4.0 Ah) 120 (5.0 Ah) 0.4 DCB115 230 10.8/14.4/18 Li-Ion 25 (1.3 Ah) 30 (1.5 Ah) 40 (2.0 Ah) 55 (3.0 Ah) 70 (4.0 Ah) 90 (5.0 Ah) 0.5 Weight kg Fuses: Europe U.K.
English c) d) e) f) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
English d) small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
English • Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in risk of fire, electric shock, or electrocution. 2. Insert the battery pack (F) into the charger. The red (charging) light will blink continuously indicating that the charging process has started. • Do not place any object on top of charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat.
English A cold battery pack will charge at about half the rate of a warm battery pack. The battery pack will charge at that slower rate throughout the entire charging cycle and will not return to maximum charge rate even if the battery warms. LITHIUM-ION BATTERY PACKS ONLY XR Li-Ion tools are designed with an Electronic Protection System that will protect the battery against overloading, overheating or deep discharge. The tool will automatically turn off if the Electronic Protection System engages.
English Regardless of whether a shipment is considered excepted or fully regulated, it is the shipper's responsibility to consult the latest regulations for packaging, labeling/marking and documentation requirements. Transporting batteries can possibly cause fire if the battery terminals inadvertently come in contact with conductive materials. When transporting batteries, make sure that the battery terminals are protected and well insulated from materials that could contact them and cause a short circuit.
English NOTE: Battery packs, chargers and kitboxes are not included with N models. Battery packs and chargers are not included with NT models. B models include Bluetooth® battery packs. NOTE: The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth®, SIG, Inc. and any use of such marks by DeWALT is under license. Other trademarks and trade names are those of their respective owners. • Check for damage to the tool, parts or accessories which may have occurred during transport.
English TO INSTALL THE BATTERY PACK INTO THE TOOL HANDLE 1. Align the battery pack (F) with the rails inside the tool’s handle (Fig. 2). 2. Slide it into the handle until the battery pack is firmly seated in the tool and ensure that you hear the lock snap into place. TO REMOVE THE BATTERY PACK FROM THE TOOL To move belt hook or magnetic bit holder, remove the screw (I) that holds it in place then reassemble on the opposite side. Be sure to securely tighten the screw. OPERATION Instructions for Use 1.
English To select reverse, release the trigger switch (A) and depress the forward/reverse control button (B) on the left side of the tool. The centre position of the control button locks the trigger switch in the off position. When changing the position of the control button, be sure the trigger is released. NOTE: The first time the tool is run after changing the direction of rotation, you may hear a click on start up. This is normal and does not indicate a problem. Worklights (Fig.
English MAINTENANCE Your DeWALT power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury. The charger and battery pack are not serviceable.
Belgique et Luxembourg België en Luxemburg DeWALT - Belgium BVBA Egide Walschaertsstraat 16 2800 Mechelen Tel: NL Tel: FR Fax: Danmark DeWALT Roskildevej 22 2620 Albertslund Tel: 70 20 15 10 Fax: 70 22 49 10 www.dewalt.dk kundeservice.dk@sbdinc.com Deutschland DeWALT Richard Klinger Str. 11 65510 Idstein Tel: 06126-21-1 Fax: 06126-21-2770 www.dewalt.de infodwge@sbdinc.com Ελλάς DeWALT (Ελλάς) Α.Ε. Τηλ: 00302108981616 EΔΡΑ-ΓΡΑΦΕΙΑ : Στράβωνος 7 Φαξ: 00302108983570 & Λ.
