User Manual

5
ENGLISH
EC-Declaration of Conformity
Machinery Directive
18V Cordless Impact Wrench
DCF894, DCF894H
DEWALT declares that these products described under Technical
Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-2:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
EWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofD
EWALT.
Markus Rompel
Director Engineering
D
EWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
03.11.2017
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.

Denotes risk of electricshock.

Denotes risk offire.
18V CORDLESS IMPACT WRENCH
DCF894, DCF894H
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough
product development and innovation make DEWALT one of the
most reliable partners for professional power toolusers.
Technical Data
DCF894 DCF894H
Voltage V
DC
18 18
Type 1 1
Battery type Li-Ion Li-Ion
Power output W 580 580
No load speed
1st speed min
-1
0–900 0–900
2nd speed 0–2000 0–2000
3rd speed 0–2000 0–2000
Impact rate min
-1
0–3100 0–3100
Max. torque Nm 447 447
Tool holder 1/2"
(13mm)
1/2"
(13mm)
Weight (without battery pack) kg 1.5 1.5
Noise values and vibration values (triax vector sum) according to EN60745-2-2:
L
PA
(emission sound pressure
level)
dB(A) 94 94
L
WA
(sound power level) dB(A) 105 105
K (uncertainty for the given
sound level)
dB(A) 3 3
Vibration emission value a
h
= m/s
2
13.5 13.5
Uncertainty K = m/s
2
4.4 4.4
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation of
workpatterns.