Product Manual
ENGLISH
8
OPERATION
WARNING: To reduce the risk of serious personal
injury, turn unit off and lock off the toolremove
the battery pack before making any adjustments
or removing/installing attachments or
accessories. An accidental start-up can causeinjury..
Anvil with Hog Ring (Fig. A)
DCF902To install an accessory on the hog ring
anvil, firmly push accessory onto the anvil ( 9 ). The hog
ring ( 10 ) compresses to allow the accessory to slide on.
After accessory is installed, the hog ring applies pressure to
help provide accessoryretention.
To remove an accessory, grasp the accessory and firmly
pull it off.
Quick-Release Chuck (Fig. C)
DCF801
NOTE: The chuck accepts 1/4" (6.35 mm) hex accessories
and 1" (25.4 mm) bit tips only.
Place the forward/reverse button
4
in the lock-off
(center) position and remove battery pack before
changingaccessories.
To install an accessory, fully insert the accessory into the
quick-release chuck
7
. The accessory is locked into place
(Fig.C).
To remove an accessory, pull the chuck collar
8
away
from the front of the tool. Remove the accessory from the
quick-release chuck
7
(Fig.C).
Fig.C
4
8
7
Precision Drive™ (Fig. A)
DCF801
In addition to normal impacting modes, this tool features
the Precision Drive™ mode which enables greater control
in lighter applications to avoid damage to materials or
fasteners. It is ideal for light applications such as cabinet
hinge screws or machine screws. Precision Drive™ mode
will work as a screwdriver in light applications, before
hesitating as the screw head reaches the workpiece, and
then (if required) start a slow controlled impact to ensure
the head ends perfectlyflush.
NOTE: This mode is for light duty screwdriving applications.
If the tool will not drive a fastener in Precision Drive™
mode, please select Lo Mode which will give the additional
powerrequired.
DCF801
Precision Drive™ mode Precision Drive™
Lo Mode Low Speed Impacting
Hi Mode High Speed Impacting
Precision Wrench™ (Fig. A)
DCF902
In addition to normal impacting modes, this tool features
the Precision Wrench™ mode which grants the user greater
Fig.B
12
11
13
Belt Hook and Bit Clip (Fig. B)
Optional Accessory
WARNING: To reduce the risk of serious personal
injury, ONLY use the tool’s belt hook to hang
the tool from a work belt. DO NOT use the belt
hook for tethering or securing the tool to a person or
object during use. DO NOT suspend tool overhead or
suspend objects from the belthook.
WARNING: To reduce the risk of serious personal
injury, ensure the screw holding the belt hook
issecure.
IMPORTANT: When attaching or replacing the belt hook or
bit clip, use only the screw
12
that is provided. Be sure to
securely tighten thescrew.
The belt hook
11
and bit clip
13
can be attached to
either side of the tool using only the screw
12
provided, to
accommodate left- or right- handed users. If the belt hook
or bit clip is not desired at all, they can be removed from
thetool.
To move the belt hook or bit clip, remove the screw that
holds it in place then reassemble on the opposite side. Be
sure to securely tighten thescrew.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn unit off and lock off the toolremove
the battery pack before making any adjustments
or removing/installing attachments or
accessories. An accidental start-up can causeinjury.