Use and Care Manual

English

Side Handle (Fig. 2)

WARNING: To reduce the risk of personal injury, ALWAYS operate

the tool with the side handle (A) properly installed. Failure to do so may

result in the side handle slipping during tool operation and subsequent

loss of control. Hold tool with both hands to maximizecontrol.

The side handle (A) clamps to the front barrel (collar) and may be

rotated 360° to permit right-or left-hand use. The side handle can

be tightened by rotating the black plastic portion of the side handle

clockwise. The side handle must be tightened sufficiently to resist the

twisting action of the tool if the accessory binds or stalls. Be sure to

grip the side handle at the far end to control the tool during a stall. To

loosen side handle, rotatecounterclockwise.

Trigger Switch (Fig. 2)

To turn the tool on, squeeze the trigger switch (B). To turn the tool

off, release the trigger switch. Your tool is equipped with a brake. The

chuck will stop as soon as the trigger switch is fullyreleased.

VARIABLE SPEED TRIGGER SWITCH

The variable speed trigger switch enables you to select the best speed

for a particular application. The farther you squeeze the trigger switch,

the faster the tool will operate. For maximum tool life, use variable

speed only for starting holes orfasteners.

NOTE: Continuous use in variable speed range is not recommended.

It may damage the trigger switch and should beavoided.

Utility Hook (Fig. 3)

A utility hook is fitted to the left side of the tool. To extend the utility

hook pull it out from the side of the tool. To store the utility hook push

it back flush with the side of thetool. The utility hook (J) and can be

positioned to the left or right of the tool to accommodate left or right-

handedusers.

INTENDED USE

These heavy-duty cordless rotary hammers are designed for

professional concrete drilling and chiselingapplications.

DO NOT use under wet conditions or in presence of flammable liquids

orgases.

These heavy-duty cordless rotary hammers are professional power

tools. DO NOT let children come into contact with the tool. Supervision

is required when inexperienced operators use thistool.

FIG. 2