Specification Sheet

DUST
SOLUTIONS
YOUR FIRST LINE OF DEFENSE.
™
TOOLS
Operate and maintain
tool in accordance with
manufacturer's instructions
to minimize dust emissions.
• Read operator’s manual
provided with tool and
accessories.
• To minimize dust emissions
use recommended shroud or
cowling and dust extractor
Compliant Versions
available by Sept 2017
ACCESSORIES
AND SHROUDS
Use drill or grinder equipped
with commercially available
shroud or cowling with dust
collection system.
• All DEWALT shrouds and
dust collection systems
are commercially available.
DUST EXTRACTORS
Dust collector must provide the air flow recommended by the
tool manufacturer, or greater, and have a filter with 99% or
greater efficiency. Dust collector must have a cyclonic pre-
separator or filter-cleaning mechanism. Cleaning/Drilling holes
requires a vacuum with a HEPA filter.
• Both DWV010 and DWV012 provide the necessary airow for
drilling and hammering applications.
• Both DWV010 and DWV012 ship with dual HEPA lters, which
have an efciency of 99.97% of all particles greater than or equal
to 0.3 microns.
• Both DWV010 and DWV012 have a timed automatic lter-
cleaning mechanism.
• Surfacing, Tuckpointing, and Cutting with grinder requires 25
CFM per inch of wheel diameter, a lter cleaning mechanism,
and 99% or greater efciency.
ARE YOU COMPLIANT?
The Occupational Safety and Health Administration (OSHA) rules with the intent to limit workers’ exposure to respirable crystalline silica.