Use and Care Manual

English

TROUBLESHOOTING

Problem Solution

Unit will not start. • Check battery installation.

• Check battery charging requirements.

• Check that lock off is fully pushed

down prior to moving main trigger.

Battery won’t charge. • Insert battery into charger until red

charging light illuminates. Charge up

to 8 hours if battery is totally drained.

•

Plug charger into a working outlet. Refer

Important Charging Notes

for

more details.

• Check current at receptacle by

plugging an appliance.

• Check to see if receptacle is

connected to a light switch which

turns power off when you turn out the

lights.

• Move charger and appliance to a

surrounding air temperature of above

40°F (4.5°C) or below 105°F

(40.5°C).

Slow running, noisy,

or hot blades.

• Inspect for nicks and remove if possible.

• Lubricate blades.

• Bring to a D

eWALT factory service

center to straighten blade, blade

support, or teeth.

• Tighten bolts on the blade.