Operation Manual

ENGLISH
28
Package Contents
The package contains:
1 Charger/radio
1 Instruction manual
1 Exploded drawing
• Check for damage to the radio, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description(fi g.1–3)
WARNING: Never modify the radio or
any part of it. Damage or personal injury
could result.
a. Power button
b. Volume dial
c. Arrow buttons
d. Mode button
e. Menu button
f. Memory buttons
g. Enter/Display button
h. LCD display
i. Battery compartment latch
j. Battery receptacle
k. Auxiliary port
l. Coin cell battery door
m. Coin cell battery
n. Outlets
o. Charging light
p. USB power output port
Electrical Safety
Always check that the battery pack voltage
corresponds to the voltage on the rating plate.
Also make sure that the voltage of your charger
corresponds to that of your mains.
WARNING: Risk of electric shock. Use
in dry locations only.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
DEWALT service organisation.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
Read instruction manual before use.
Charging.
Fully charged.
Hot/cold pack delay.
x
Problem pack or charger.
Do not probe with conductive objects.
Do not charge damaged battery packs.
CR017
Use only with DEWALT battery packs.
Others may burst, causing personal injury
and damage.
Do not expose to water.
Have defective cords replaced
immediately.
Charge only between 4°C and 40°C.
Discard the battery pack with due care for
the environment.
Do not incinerate the battery pack.
Charges Li-Ion battery packs.
See Technical Data for charging time.