Technical data

31
ENGLISH
Cleaning
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the radio. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
radio; never immerse any part of the
radio into a liquid.
CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect
the charger from the AC outlet before
cleaning. Dirt and grease may be
removed from the exterior of the radio
using a cloth or soft non-metallic brush.
Do not use water or any cleaning
solutions.
Optional Accessories
WARNING: Since accessories, other
than those offered by DEWALT, have
not been tested with this product, use
of such accessories with this radio
could be hazardous. To reduce the risk
of injury, only DEWALT recommended
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your DEWALT product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
To Adjust the Clock Manually:
(FM and DAB mode)
1. Press the Menu button(e).
2. Use the arrow buttons(c) to scroll to Clock
Adjust on the LCD display and press the Enter/
Display button(g).
3. Scroll to Date & Time and press the Enter/
Display button(g).
4. Set the date and time using left and right arrow
buttons(c).
5. Once the desired time is set press the Enter/
Display(g) button to commit.
Other Clock Adjust menu options:
• Time format: Select a 12h or 24h time display
format
• Date format: Select the date display format,
MM/DD/YYYY, YYYY/MM/DD or DD/MM/YYYY.
Important Radio Notes (Fig. 3)
1. The radio will run for up to 14 hours on a
fully charged 4.0 amp hour battery in good
condition. Using batteries of lower voltage or
capacity will result in less run time.
2. Reception will vary depending on location and
strength of radio signal.
3. Certain generators may cause background
noise.
4. To use the auxiliary port(l), plug the output
jack from a CD or iPod
®
*/MP3 player into the
port. The sound from the external source plays
through the speakers of the radio.
5. The USB power output port (p) is a connection
port for powering low power devices such as
mobile phones, CD and MP3 players. Note that
the radio will not charge via the USB port when
powered by batteries.
* iPod is a registered trademark of Apple Inc.
MAINTENANCE
Your DEWALT radio has been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper care.
Service Notes
This product is not user serviceable. There are no
user serviceable parts inside the radio. Servicing
at an authorised service centre is required to avoid
damage to static sensitive internal components.