Use and Care Manual

20
E
Using DW0165S/DW0330S With
If you have a DW0165S or DW0330S, you can use
its Bluetooth
®
capability to pair it with the DEWALT
®
Tool Connect™ application on your cell phone
or tablet, and then mark up room photos with the
measurements you have taken.
1.
From either or , download
the D
EWALT
®
Tool Connect™ application to your
cell phone or tablet.
2.
Using the DEWALT
®
Tool Connect™ application,
capture the room or space for which you want to
record the measurements, by taking room photos.
3.
On the DW0165S or DW0330S keypad, press
to turn on the tool.
4.
If appears on the screen (Figure
C 2
), turn
on the Bluetooth
®
connection.
• On the keypad, press
to display the main
menu.
• Select
.
• Press
to turn on the Bluetooth
®
connection.
5.
Use the DEWALT
®
Tool Connect™ application to
pair your cell phone or tablet to the DW0165S or
DW0330S, and then mark up room photos with
the measurements you have taken.
THE BLUETOOTH® WORD MARK AND LOGOS ARE
REGISTERED TRADEMARKS OWNED BY BLUETOOTH SIG,
INC. AND ANY USE OF SUCH MARKS BY DEWALT IS UNDER
LICENSE. APPLE AND THE APPLE LOGO ARE TRADEMARKS
OF APPLE INC., REGISTERED IN THE U.S. AND OTHER
COUNTRIES. APP STORE IS A SERVICE MARK OF APPLE
INC., REGISTERED IN THE U.S. AND OTHER COUNTRIES.
GOOGLE PLAY AND THE GOOGLE PLAY LOGO ARE TRADE-
MARKS OF GOOGLE INC.
Viewing the Tool's Memory
Up to the last 20 measurements are stored in the
tool's memory.
1.
Point the tool's laser (Figure
A 1
) toward a wall
or object, and not toward anyone's eyes.
2.
Press (Figure
A 3
) to turn the tool on
and display the red laser dot.
3.
Select as the measurement type.
• Press
to display the Main Menu
(Figure
E 2
).
• Press
to select .
• Press
to display the Measurement Type
Menu (Figure
E 3
).
• Press the arrow buttons to select
(Figure
E 4
).
• Press
.
4.
View the last measurement that was taken. Press
to scroll through all the measurements that
have been stored in the tool's memory (up to 20).
Press
to scroll back.
Clearing the Tool's Memory
You can clear one or more measurements that are
currently in the tool's memory.
Clearing a Measurement
1.
Point the tool's laser (Figure
A 1
) toward a wall
or object, and not toward anyone's eyes.
2.
Press (Figure
A 3
) to turn the tool on
and display the red laser dot.
3.
Select as the measurement type.
• Press
to display the Main Menu
(Figure
E 2
).
• Press
to select .
• Press
to display the Measurement Type
Menu (Figure
E 3
).
• Press the arrow buttons to select
(Figure
E 4
).
• Press
.
4.
Specify which measurement you want to delete:
• To delete a specific measurement, continue
with step 5.
• To delete ALL measurements, skip to step 6.
5.
To delete a specific measurement:
• Press
or to scroll through the
measurements that have been stored in the
tool's memory (up to 20) until you display the