SDS
Safety Data Sheet
Date of Issue: Feb. 11, 2020
Page 5 of 12
7. Handling and Storage
7.1 Precaution for safe handling
In case of rupture, use personal protection equipment. Avoid contact with skin, eyes or
clothing. Ensure adequate ventilation. Do not breathe dust/fume/gas/mist/vapors/spray.
7.2 Conditions for safe storage, including any incompatibilities
Storage
Keep containers tightly closed in a dry, cool and well-ventilated place. Store locked up. Keep
out of the reach of children.
Incompatible products
Strong acids. Strong oxidizing agent. Strong bases.
8. Exposure Controls/Personal Protection
8.1 Exposure Guidelines
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Lithium Cobalt
Oxide 12190-79-3
TWA:0.02mg/m
3
-
-
ACGIH TLV: American Conference of Governmental Industrial Hygienists-Threshold Limit Value
OSHA PEL：Occupational Safety and Health Administration-Permissible Exposure Limits
NIOSH IDLH Immediately Dangerous to Life or Health.
Other Exposure Guidelines:
Vacated limits revoked by the court of Appeals decision in AFL-CLO v. OSHA, 965F, 2d
962(11th Cir., 1992) See section 15 for national exposure control parameters.
8.2 Appropriate engineering controls
Engineering Measures:
Showers、 Eyewash stations、Ventilation systems
8.3 Individual protection measures, such as personal protective equipment
Respiratory protection : No protective equipment is needed under normal use conditions. If
exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be
required.
Eye /face protection: if splashes are likely to occur: Wear safety glasses with side shields(or
goggles). None required for consumer use.
Skin protection: Wear protective gloves and protective clothing. Long sleeved clothing.
Imperious gloves.
Hygiene Measure: Handle in accordance with good industrial hygiene and safety practice.
Do not eat, drink or smoke when using this product. Take off contaminated clothing and
wash before reuse. Avoid contact with skin, eyes or clothing. Wear suitable gloves and
eye/face protection. Wash hands before breaks and immediately after handling the product.
For environmental protection, remove and wash all contaminated protective equipment
before re-use. No information available.