www. .
Copyright DEWALT 2
Figure 1A b DW625 nn l m k n a xxxx xx xx 4 j o j i p h q g c f e d u t r s 1
Figure 1B j a w n c v Figure 3 Figure 2 c y x 2 c d
Figure 4 Figure 5 aa q t a i g l Figure 6 Figure 7 k f bb l s cc r m Figure 8 v w q 3
Figure 9 u ee ff Figure 10 jj ll ii ll hh kk 4
Figure 11 Figure 12 5
EN GLI S H ROUTER DW624, DW625E WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. Congratulations! You have chosen a DEWALT tool.
E NG L I S H Denotes risk of fire. b) EC-Declaration of Conformity MACHINERY DIRECTIVE DW624, DW625E DEWALT declares that these products described under “technical data” are in compliance with: 2006/42/EC, EN 60745-1, EN 60745-2-17. These products also comply with Directive 2004/108/EC. For more information, please contact DEWALT at the following address or refer to the back of the manual. The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of DEWALT.
EN GLI S H d) e) f) g) tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly.
E NG L I S H – Risk of personal injury due to prolonged use. Markings on Tool The following pictograms are shown on the tool: Read instruction manual before use. l. Measuring lens m. Scale n. Plunge lock o. Clamping screw p. Depth stop q. Fine adjuster for depth stop DATE CODE POSITION (FIG. 1) r. Fine adjuster for parallel fence The Date Code (nn), which also includes the year of manufacture, is printed into the housing. s. Parallel fence Example: u.
EN GLI S H • Connect the blue lead to the neutral terminal. WARNING: No connection is to be made to the earth terminal. Turn the electronic speed control dial to the required level. The correct setting, however, is a matter of experience. 1 = 8,000 min-1 Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 13 A.
E NG L I S H Fine Adjustments (fig. 6) When not using a depth template, or if the depth of cut needs readjustment, it is recommended to use the fine adjuster (q). 1. Adjust the depth of cut using the fine adjuster (q). Fitting the Baseplate Extension (Option) (fig. 1B, 8) 1. Fit the baseplate extension (v) to the free end of the guide rods. 2. Guide the tool with one hand on the knob (w) and the other on the opposite grip (j). 2. Read the depth of cut using the measuring lens (l) and scale (m).
EN GLI S H WARNING: Routing with Pilot Cutters (fig. 2) • Always observe the safety instructions and applicable regulations. Where a parallel guide or guide bush are inappropriate, it is possible to use pilot cutters (x) for cutting shaped edges. • Always move your router as indicated in fig. L (outer edges/inner edges). Proper Hand Position (fig. 1, 12) WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown.
E NG L I S H Optional Accessories WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT, recommended accessories should be used with this product. Consult your dealer for further information on the appropriate accessories. Protecting the Environment Separate collection. This product must not be disposed of with normal household waste.
Belgique et Luxembourg België en Luxemburg Black & Decker - DEWALT Nieuwlandlaan 7, IZ Aarschot B156 B-3200 Aarschot Tel: +32 (0)015 - 15 47 9211 Fax: +32 (0)015 - 15 47 9210 www.dewalt.be Danmark DEWALT Sluseholmen 2-4 2450 København SV Tlf: 70201511 Fax: 70224910 www.dewalt.dk Deutschland DEWALT Richard-Klinger-Straße 65510 Idstein Tel: 06126-21-1 Fax: 06126-21-2770 www.dewalt.de Ελλάς Black & Decker (Hellas) S.A.
