Operation Manual

27
ENGLISH
MITRE SAW DW716/DW716E/DW716EXPS
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product
development and innovation make DEWALT one of the most reliable
partners for professional power tool users.
Technical Data
DW716 DW716E
DW716EXPS
Voltage V 230 230
(U.K. & Ireland only) V 230/115 230/115
Type 2 2
Power input W 1,675 1,675
Blade diameter mm 305 305
Blade bore mm 30 30
Blade body thickness mm 1.8 1.8
Max. blade speed min-
1
3,600 1,900–3,400
Max. cross-cut capacity 90° mm 203 203
Max. mitre capacity 45° mm 144 144
Max. depth of cut 90° mm 85 85
Max. depth of bevel cross-cut 45° mm 56 56
Mitre (max. positions) left 50° 50°
right 50° 50°
Bevel (max. positions) left 50° 50°
right 50° 50°
0° mitre
Resulting width at max. height 85 mm mm 190 190
Resulting height at max. width 203 mm mm 72 72
45° mitre left
Resulting width at max. height 85 mm mm 133 133
Resulting height at max. width 142 mm mm 72 72
45° mitre right
Resulting width at max. height 85 mm mm 134 134
Resulting height at max. width 144 mm mm 72 72
45° bevel left
Resulting width at max. height 56 mm mm 190 190
Resulting height at max. width 203 mm mm 47 47
45° bevel right
Resulting width at max. height 40 mm mm 190 190
Resulting height at max. width 203 mm mm 30 30
31.62° mitre, 33.85° bevel
Resulting height at max. width 168 mm mm 23 23
Automatic blade brake time s < 10.0 < 10.0
Weight kg 18.5* 18.5*
* DW716EXPS with Worklight LED
L
PA
(sound pressure) dB(A) 95 95
K
PA
(sound pressure uncertainty) dB(A)
3.0 3.0
L
WA
(sound power) dB(A) 106 106
K
WA
(sound power uncertainty) dB(A) 3.1 3.1
Vibration total values (triax vector sum) determined according to EN 61029:
Vibration emission value a
h
a
h
= m/s² 2.2 2.2
Uncertainty K = m/s² 1.5 1.5
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.
WARNING: The declared vibration emission level represents
the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns..
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
U.K. & Ireland 115 V tools 16 Amperes, mains
NOTE: This device is intended for the connection to a power supply system
with maximum permissible system impedance Zmax of 0.30 Ω at the
interface point (power service box) of user’s supply.
The user has to ensure that this device is connected only to a power system
which fulfils the requirement above. If necessary, the user can ask the public
power supply company for the system impedance at the interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DW716/DW716E/DQW716EXPS
D
EWALT declares that these products described under “technical data” are
in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-9.
These products also comply with Directive 2004/108/EC. For more
information, please contact DEWALT at the following address or refer to the
back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of DEWALT.
Horst Grossmann
Vice President Engineering and Product Development
DEWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
29.12.2009