Operation Manual

ENGLISH
19 en - 1
RADIAL ARM SAW DW721/DW722/DW725/DW726
Congratulations!
You have chosen a DEWALT power tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable
partners for professional power tool users.
DW721 DW722 DW725 DW726
Power input W 2,000 3,000 2,000 3,000
Power output W 1,500 2,280 1,500 2,280
Voltage V 230 400 230 400
Blade diameter mm 270-300 270-300 270-300 270-300
Blade bore mm 30 30 30 30
Spindle diameter mm 20 20 20 20
No-load speed, 50 Hz min
-1
3,000 3,000 3,000 3,000
No-load speed, 60 Hz min
-1
3,600 3,600 3,600 3,600
Depth of cut at 90° mm 90 90 90 90
Depth of cut at 45° mm 60 60 60 60
Max. crosscut capacity at 0°, in 25 mm stock mm 610 610 460 460
Max. mitre cut capacity at 45°, in 25 mm stock
righthand mm 405 405 290 290
lefthand mm 425 425 320 320
Max. crosscut width mm 610 610 460 460
Max. rip cut width mm 870 870 720 720
Overall dimensions cm 148 x 95 x 77 148 x 95 x 77 128 x 110 x 77 128 x 110 x 77
(with legstand) cm 148 x 95 x 147 148 x 95 x 147 128 x 110 x 147 128 x 110 x 147
Dust extraction adapter mm 100 100 40 40
Weight kg 115 115 97 97
Standard equipment:
Legstand, TCT blade, blade guard and tools, no-volt release switch.
Fuses:
Europe 230 V tools 16 Amperes, mains
400 V tools 16 Amperes, per phase
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
EC-Declaration of conformity
DW721
DEWALT declares that these power tools have been designed in
compliance with: 98/37/EEC, 89/336/EEC, 73/23/EEC, EN 61029,
EN 55014-2, EN 55014, EN 61000-3-2 & EN 61000-3-11.
DW722/DW725/DW726
DEWALT declares that these power tools have been designed in
compliance with: 98/37/EEC, 89/336/EEC, 73/23/EEC, EN 61029,
EN 55014-2, EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DEWALT at the address below or
refer to the back of the manual.
Level of sound pressure according to 86/188/EEC & 98/37/EEC,
measured according to DIN 45635:
DW721 DW722 DW725 DW726
L
pA
(sound pressure) dB(A)* 84.2 84.2 84.2 84.2
L
WA
(acoustic power) dB(A) 91.4 91.4 91.4 91.4
* at the operator’s ear
Weighted root mean square acceleration value according to DIN 45675:
DW721 DW722 DW725 DW726
< 2.5 m/s
2
< 2.5 m/s
2
< 2.5 m/s
2
< 2.5 m/s
2
Director Engineering and Product Development
Horst Großmann
DEWALT, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany
TÜV Rheinland
Product and Safety GmbH (TRPS)
Am Grauen Stein 1
D-51105 Köln
Germany
Cert. No.
BM 9511442 01