® DW933K DW933K2
10 2 9 11 7 8 6 5 3 4 11 12 14 13 A
4 10 5 C B 15 16 D E 17 F G
6 18 H I
ENGLISH CORDLESS JIGSAW DW933K(2) Congratulations! You have chosen a DEWALT Power Tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional Power Tool users. Fuses: Europe U.K.
ENGLISH DW933K(2) < 2.5 m/s2 Director Engineering and Product Development Horst Großmann DEWALT, Richard-Klinger-Straße 40, D-65510, Idstein, Germany Safety instructions When using Power Tools, always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. Read the following safety instructions before attempting to operate this product.
ENGLISH Have damaged guards or other defective parts repaired or replaced as instructed. Do not use the tool if the switch is defective. Have the switch replaced by an authorized DEWALT repair agent. 16 Remove the battery pack Remove the battery pack when not in use, before servicing and when changing accessories. 17 Have your tool repaired by an authorized DEWALT repair agent This Power Tool is in accordance with the relevant safety regulations.
ENGLISH Description (fig. A) Your cordless jigsaw DW933K(2) has been designed for professional cutting of wood, steel, aluminium and PVC. 1 Variable speed switch 2 Lock-off button 3 Pendulum stroke selector 4 Shoe lever 5 Shoe 6 Guide roller 7 Chip extraction shroud 8 Blade holder 9 Lever for sawdust blower 10 Rotating handle for DSS system 11 Battery pack Charger Your DEWALT charger accepts battery packs ranging from 7.2 V to 18 V.
ENGLISH Do not charge the battery pack at ambient temperatures <4 °C or >40 °C. Recommended charging temperature: approx. 24 °C. • To charge the battery pack (11), insert it into the charger (13) as shown and plug in the charger. Be sure that the battery pack is fully seated in the charger. The red charging indicator (14) will blink. After approx. 1 hour, it will stop blinking and remain on. The battery pack is now fully charged.
ENGLISH • • • • Do not cut materials that are thicker than the maximum cutting depth. Use sharp saw blades only. Damaged or bent saw blades must be removed immediately. Never run your tool without a saw blade. For optimal results, move the tool smoothly and constantly over the workpiece. Do not exert lateral pressure on the saw blade. Keep the shoe flat on the workpiece. When sawing curves, circles or other round shapes, push the tool gently forward.
ENGLISH Environment GUARANTEE • 30 DAY NO RISK SATISFACTION GUARANTEE • Rechargeable battery pack This long life battery pack must be recharged when it fails to produce sufficient power on jobs which were easily done before. At the end of its technical life, discard it with due care for our environment: • Run the battery pack down completely, then remove it from the tool. • NiCd cells are recyclable. Take them to your dealer or a local recycling station.