Operation Manual

16
ENGLISH
en - 1
CORDLESS TRIM SAW DW935K2/DW936K2
Congratulations!
You have chosen a DEWALT Power Tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional Power Tool users.
Table of contents
Technical data en - 1
EC-Declaration of conformity en - 1
Safety instructions en - 2
Package contents en - 4
Description en - 4
Electrical safety en - 4
Mains plug replacement (U.K. & Ireland only) en - 5
Using an extension cable en - 5
Assembly and adjustment en - 5
Instructions for use en - 6
Maintenance en - 7
Guarantee en - 8
Technical data
DW935K2 DW936K2
Voltage V 14.4 18
Max. power output W 340 340
No load speed min
-1
3,000 3,200
Blade diameter mm 136 136
Depth of cut mm 41 41
Blade body thickness mm 1.1 1.1
Blade bore mm 10 10
Bevel angle adjustment 0 - 50° 0 - 50°
Weight (without battery pack) kg 3.3 3.3
Battery pack DE9091 DE9095
Voltage V 14.4 18
Capacity Ah 2.0 2.0
Weight kg 0.7 0.7
Charger DE9107 DE9108
Mains voltage V 230 230
Charging time h 1 1
Weight kg 0.4 0.4
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-
observance of the instructions in this manual.
Denotes risk of electric shock.
Fire hazard!
EC-Declaration of conformity
DW935K2/DW936K2
DEWALT declares that these Power Tools have been
designed in compliance with: 89/392/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 55104,
EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DEWALT at the
address below or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
89/392/EEC, measured according to EN 50144:
DW935K2 DW936K2
L
pA
(sound pressure) dB(A)* 84.4 83
L
WA
(acoustic power) dB(A) 92 91
* at the operator’s ear
Take appropriate measures for the
protection of hearing if the sound
pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value
according to EN 50144:
DW935K2 DW936K2
< 2.5 m/s
2
< 2.5 m/s
2