www. .
Figure 1 d b f c h g e q a Figure 3 Figure 2 l m g l k k 1
Figure 4 o n j f Figure 5 o p i n 2
Figure 6 3
E NG L I S H ALLIGATOR SAW DWE396, DWE397, DWE398, DWE399 Congratulations! You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users.
EN GLI S H The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ.
E NG L I S H c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) ELECTRICAL SAFETY a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
EN GLI S H 5) SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Additional Safety Rules for Alligator Saws • Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord.
E NG L I S H • Check for damage to the tool, parts or accessories which may have occurred during transport. • Take the time to thoroughly read and understand this manual prior to operation. Description (fig. 1) WARNING: Never modify the power tool or any part of it. Damage or personal injury could result. a. On/off trigger switch b. Lock-off button WARNING: No connection is to be made to the earth terminal. Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 13 A.
EN GLI S H 5. Close the gearcase cap (l) and tighten the gearcase cap screw. WARNING: Before operation let the saw blades run freely for approx. 20 s. Saw Blades Cat. No.
E NG L I S H 3. Switch the tool on before placing blade in contact with the workpiece. Refer to Switching On and Off instruction in this manual. WARNING: Apply only a gentle pressure to the tool and do not exert side pressure on the saw blade. 4. After blades have engaged the workpiece, guide the tool back and forth in a rotating, see saw like motion as the blades cut down through the workpiece. Refer to Figure 6. 5. Once cut is complete, release the trigger switch.
EN GLI S H Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
E NG L I S H GUARANTEE DEWALT is confident of the quality of its products and offers an outstanding guarantee for professional users of the product. This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.