Product Manual

English

COMPONENTS (Fig. 1)

WARNING: Never modify the power tool or any part of it. Damage

or personal injury could result.

A. Paddle switch

(DWE402, DWE402N,

DWE402G, DWE4222,

DWE4222N)

B. Slider switch

(DWE4214, DWE4224)

C. Lock-off lever

D. Spindle lock button

E. Spindle

F. Side handle

G. Anti-lockup backing flange

H. Threaded locking flange

I. Type 27 Guard

(4-1/2" / 115mm)

J. Guard release lever

K. Lock-on button

(DWE402, DWE402G,

DWE4222)

L. Lanyard connection

(DWE4222N)

Motor

Be sure your power supply agrees with the nameplate marking.

Voltage decrease of more than 10% will cause loss of power and

overheating. D

WALT tools are factory tested; if this tool does not

operate, check power supply.

INTENDED USE

These heavy-duty small angle grinders have been designed for

professional grinding, sanding, wire brush, and cut-off applications at

various work sites (i.e., construction sites).

The DWE4222N lanyard connection (L) is intended for use by

competent personnel, who are trained and knowledgeable regarding

working with tools in and around machinery and "at height".

DO NOT use under wet conditions or in presence of flammable

liquids or gases.

FIG. 1

DWE402, DWE402N, DWE402G, DWE4222, DWE4222N

DWE4222N

DWE4214, DWE4224