User Guide

5
TOOL
ACCESSORIES & SHROUDS
Dust collector must provide the air flow recommended by the tool manufacturer,
or greater, and have a filter with 99% or greater efficiency.
• Both DWV010 and DWV012 provide the necessary airflow for drilling and
hammering applications.
• Both DWV010 and DWV012 ship with dual HEPA filters, which have an
efficiency of 99.97% of all particles greater than or equal to 0.3 microns.
Cleaning/Drilling holes requires a vacuum with a HEPA filter.
• Both DWV010 and DWV012 ship with dual HEPA filters, which have an
efficiency of 99.97% of all particles greater than or equal to 0.3 microns.
• Dust collector must have a cyclonic pre-separator or filter-cleaning mechanism.
DUST EXTRACTOR
Operate and maintain tool in accordance with manufacturer's instructions to
minimize dust emissions.
• Read operator’s manual provided with tool and accessories.
• To minimize dust emissions use recommended shroud or cowling and dust extractor
The Occupational Safety and Health Administration (OSHA) has issued a final rule to curb lung cancer, silicosis,
chronic obstructive pulmonary disease and kidney disease in America's workers by limiting their exposure to
respirable crystalline silica. This rule requires engineering controls to keep workers from breathing silica dust.
Use drill equipped with commercially available shroud or cowling with dust
collection system.
• All D
eWALT shrouds and dust collection systems are commercially available.
Use grinder equipped with commercially available shroud and dust collection system.
• All D
eWALT shrouds and dust collection systems are commercially available.
Compliant Versions
available by June 2017
OSHA COMPLIANT SOLUTIONS