Use and Care Manual

2. Pull pusher back behind nail stick and release.

3. Ensure magazine pusher is behind the last nail stick.

FIG. 4

Depth Setting (Fig. 1)

WARNING: Disconnect air line from tool and remove fasteners

from magazine before making adjustments or personal injury may

result.

The fastener depth control adjustment feature provides control of

the nail drive depth from flush with or just above the work surface

to shallow or deep countersink.

Rotate depth control adjustment wheel (K) to give the desired depth

of drive.

Belt Hook (Fig. 1, 5)

The belt hook (J) can be changed to either side of the tool to

accommodate left- or right-handed users.

INSTALLING THE BELT HOOK

WARNING: Disconnect air line from tool and remove fasteners

from magazine before making adjustments or before attempting any

assembly or disassembly.

WARNING: Always remove the belt hook from the tool when

selecting Contact Trip Mode.

1. Assure that the sequential trip mode is selected.

2. Squeeze the sides of the belt hook body.

FIG. 5

3. Align the post on the belt hook body with the alignment hole and

push into position.

4. Release the sides of the belt hook body and check to ensure that

the belt hook is locked in position.

Using The Integrated Pencil Sharpener

(Fig. 6)

A standard pencil sharpener (L) is integrated into the belt hook for

the operator’s convenience. To sharpen a pencil, insert any standard

pencil into the hole and rotate the pencil to the right (clockwise)to

sharpen.

FIG. 6

English