Operation Manual

ENGLISH
25
TROUBLESHOOTING
FAULT POSSIBLE CAUSE REMEDY
Excessive
dust
emission
dust extractor
is full
empty the dust
extractor
filter of dust
extractor is
blocked
clean or replace
the filter
suction channel is
blocked
clean the suction
channel, refer
to Clean Dust
Extraction
Adaptor Suction
Channel under
Cleaning
the wrong drill
head is selected
select the correct
drill head
Dust
extraction
system
does not
attach to
surface
dust extractor
is full
empty the dust
extractor
filter of dust
extractor is
blocked
clean or replace
the filter
suction channel is
blocked
clean the suction
channel, refer
to Clean Dust
Extraction
Adaptor Suction
Channel under
Cleaning
suction pad is
damaged
replace the
suction pad, refer
to Replace the
Suction Pad
under Optional
Accessories
Optional Accessories
WARNING: Since accessories, other
than those offered by DEWALT, have
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only DEWALT recommended
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.
TO REPLACE THE SUCTION PAD (FIG. 1)
1. Disconnect dust extraction system from dust
extractor.
2. From the underside of unit remove the four
screws (l) to release the suction pad (i).
3. Replacement is a reversal of the above.
New suction pads are available from any D
EWALT
authorised repair agent.
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
EWALT product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
DEWALT provides a facility for the collection and
recycling of DEWALT products once they have
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
DEWALT office at the address indicated in this
manual. Alternatively, a list of authorised DEWALT
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.