Instructions for use
33
ENGLISH
English (original instructions)
MITRE SAW
DWS780
Congratulations!
You have chosen a
DeWALT
tool. Years of experience, thorough product
development and innovation make
DeWALT
one of the most reliable
partners for professional power toolusers.
Technical Data
DWS780
QS
DWS780
LX
DWS780
GB
Voltage
V
AC
230 115 230
Type
12 12 12
Power input
W 1675 1675 1675
Blade diameter
mm 305 305 305
Blade bore
mm 30 30 30
Blade body thickness
mm 1.8 1.8 1.8
Max. kerf thickness
mm 3.0 3.0 3.0
Max. blade speed
min
-1
1900–3800 – 1900–3800
U.K. & Ireland
min
-1
1600–3600 1600–3600 –
Max. cross-cut capacity 90°
mm 349 349 349
Max. mitre capacity 45°
mm 244 244 244
Max. depth of cut 90°
mm 112 112 112
Max. depth of bevel cross-cut 45°
mm 56 56 56
Mitre (max. positions)
left 50° 50° 50°
right 60° 60° 60°
Bevel (max. positions)
left 49° 49° 49°
right 49° 49° 49°
0° mitre
Resulting width at max. height 112 mm
mm 299 299 299
Resulting width at max. height 110 mm
mm 303 303 303
Resulting height at max. width 345 mm
mm 76 76 76
45° mitre left
Resulting width at max. height 112 mm
mm 200 200 200
Resulting height at max. width 244 mm
mm 76 76 76
45° mitre right
Resulting width at max. height 112 mm
mm 211 211 211
Resulting height at max. width 244 mm
mm 76 76 76
45° bevel left
Resulting width at max. height 63 mm
mm 268 268 268
Resulting height at max. width 345 mm
mm 44 44 44
45° bevel right
Resulting width at max. height 62 mm
mm 193 193 193
Resulting height at max. width 345 mm
mm 28 28 28
Automatic blade brake time
s < 10 < 10 < 10
Weight
kg 25.5 25.5 25.5
Noise values and/or vibration values (triax vector sum) according to EN62841
L
PA
(emission sound pressure level) dB(A) 92 90 92
L
WA
(sound power level) dB(A) 105 102 105
K (uncertainty for the given sound level) dB(A) 3 3 3
The vibration and/or noise emission level given in this information sheet has
been measured in accordance with a standardised test given in EN62841
and may be used to compare one tool with another. It may be used for a
preliminary assessment ofexposure.
WARNING: The declared vibration and/or noise emission level
represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly
maintained, the vibration and/or noise emission may differ. This may
significantly increase the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or noise should
also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total workingperiod.
Identify additional safety measures to protect the operator from the
effects of vibration and/or noise such as: maintain the tool and the
accessories, keep the hands warm (relevant for vibration), organisation
of workpatterns.
EC-Declaration of Conformity
Machinery Directive
Mitre saw
DWS780
DeWALT
declares that these products described under Technical Data are
in compliance with:
2006/42/EC, EN62841-1:2015/AC:2015; EN62841-3-9:2015 +AC:2016
+A11:2017.
These products also comply with Directive 2014/30/EU and 2011/65/EU. For
more information, please contact
DeWALT
at the following address or refer
to the back of themanual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of
DeWALT
.
Markus Rompel
Vice President of Engineering PTE Europe
DeWALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
29.07.19
WARNING: To reduce the risk of injury, read the instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to thesesymbols.
DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or seriousinjury.
WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or seriousinjury.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderateinjury.
NOTICE: Indicates a practice not related to personal injury which,
if not avoided, may result in propertydamage.
Denotes risk of electricshock.
Denotes risk offire.