Instruction Manual

HOME BUTTON

Press the Home button to display the home screen.

The home screen includes icons for selecting the audio source (FM/Bluetooth

/AUX), and for

accessing the Settings menu.

 NOTE: The screen automatically returns to the last playing mode screen after about 30

seconds of no activity.

SELECTING THE AUDIO SOURCE

Press the corresponding touch buttons to select the audio source (FM, Bluetooth

or AUX).

DRC BUTTON

The radio has a Dynamic Range Control feature (DRC) that enable switching between dedicated

sound settlings. Set the audio to match your environmental settings by pressing the DRC button

to switch between INDOOR mode to OUTDOOR mode.

You may also access the DRC menu through the HOME screen using the touch sensitive button

on the side.

LEFT AND RIGHT BUTTONS

When in FM audio source, pressing the Left or Right button moves between channels 1–6 and

7-12 and to the list of channels. They move between these screens rotationally.

For more information see the FM mode section.

FM MODE

The TOUGHSYSTEM

™

2.0

RADIO + CHARGER can be tuned to FM radio frequencies with the

option of saving up to twelve (12) FM preset stations (favorites). After setting and saving the

favorites, selecting a preset station instantly changes the frequency to the desired station. The

screen displays the station name and after two seconds, the station frequency.

To move between the rst six stations and the next six stations, push the Left or Right button.

Press any of the touch buttons to select one of the preset stations.

To see a list of the preset stations, press the Right button to the setting tab

and rotate the

Selection Dial to scroll through the preset stations. Press the Selection Dial to select a specic

preset station.

FM RADIO

Setting the FM preset stations can be performed by Auto Scan or by Manual Scan. To select

the scan type:

1. Press the Home button and select FM as the audio source.

2. Press the Selection Dial

to enter the FM settings screen.

3. Press the touch button to the left or right of the type of scan to perform.