Extra Information

4
COMPONENTS (Fig. 1)
WARNING: Never modify the power tool or any part of it. Damage or personal
injury could result.
A. Top handle/cord wrap K. Hose clip
B. Power cord L. Front handle
C. Vacuum head M. Outlet for power tools
D. Canister latch N. Variable suction dial
E. Wheel O. On/off/tool control switch
F. Canister P. Flow alarm adjustment
G. Suction hose Q. Telescoping handle release button
H. Casters (one equipped with R. Telescoping handle
parking brake) S. Inlet plug
I. Filters T. Bag
J. Twist-lock hose inlet U. DWV9210-XJ connector kit (includes
DWV9000, DWV9120, DWV9130)
ANTI-STATIC HOSE
The DWV902M-XE is equipped with an anti-static grounding system. An anti-static
hose must be purchased at extra cost from your authorised service center. This hose
(DWV9316) fits into the dust extractor system the same way as the standard hose.
To contact your seller or check the location of your nearest authorised D
EWALT repair
agent in the DEWALT catalogue or contact your DEWALT office at the address indi-
cated in this manual.
INTENDED USE
These vacuums are used for fine particulate pick-up, like wallboard, concrete or
surface dust.
This appliance can be used as industrial vacuum cleaner and dust extractor for mobile
operations to take up all types of dry, non-combustible dusts up to dust Class M with
limit values for occupational exposure greater than or equal to 0.1 mg/m³.
DO NOT use in rain or in presence of flammable liquids or gases.
These heavy-duty vacuums are for professional use. DO NOT let children come into
contact with the tool. Supervision is required when inexperienced operators use this
appliance.
DO NOT use the dust extractor for combustible dust.
DO NOT use the dust extractor in explosive atmospheres.
NOTE: This appliance is suited for the commercial use, e.g. in hotels, schools,
hospitals, factories, shops, offices, rental companies, and on construction sites.
ASSEMBLY AND ADJUSTMENTS (Fig. 1–3)
WARNING: To reduce the risk of serious personal injury, turn appliance off
and disconnect appliance from power source before making any adjustments or
removing/installing attachments or accessories. An accidental start-up can cause
injury.
WARNING: When using electric appliances, always follow basic safety precautions
to reduce the risk of fire, electric shock and personal injury.
WARNING: The filters (I) must always be in place while vacuuming, except as
described under Wet Pick Up Applications under Operation. When vacuuming fine
dust, you may also use an additional paper bag or fleece bag to make emptying the
canister easier.
1. If optional paper or fleece bag (T) is to be used, install as shown in Figure 2.
NOTE: Be careful not to tear the bag. Place bag securely onto inlet (J) to provide
a tight seal for maximum dust collection performance.
T
FIG. 2
J
G
J
FIG. 3
2. Place the vacuum head (C) onto the canister and secure it by closing the canister
latches (D).
3. Insert end of hose (G) into twist-lock hose inlet (J) and rotate counterclockwise
to lock in place.