Product Overview

ManualsBrandsDewalt ManualsAir Conditioning Installation Parts1/4" - 20 x 1" Bi-Flex Hex Washer Head Screws (Box of 2500)

ORDERING INFORMATION

1-800-435-7213

ORDERING INFORMATION

Bi-Flex Self-Drilling Structural Screws

Cat. No.

Description

(Diameter- TPI x

Nominal Length)

Point Type Finish

Maximum

Load-Bearing

Length

(in.)

Minimum

Protrusion

Length

(in.)

Nominal Head

Diameter

(in.)

Nominal Head

Height

(in.)

Qty / Carton

#8 Diameter, 1/4" Hex Washer Head

EAJ100 #8-18 X 3/4" #2 Stalgard GB 0.156 19/32" 0.335 0.140 5,000

EAJ102 #8-18 X 1" #2 Stalgard GB 0.406 19/32" 0.335 0.140 5,000

#8 Diameter, #2 Phillips Pan Head

EAX100 #8-18 X 3/4" #2 Stalgard GB 0.156 19/32" 0.315 0.110 5,000

EAX102 #8-18 X 1" #2 Stalgard GB 0.406 19/32" 0.315 0.110 5,000

#10 Diameter, 5/16" Hex Washer Head

EAJ110 #10-16 X 3/4" #2 Stalgard GB 0.250 1/2" 0.400 0.160 5,000

EAJ120 #10-16 X 1" #2 Stalgard GB 0.500 1/2" 0.400 0.160 5,000

EAJ140 #10-16 X 1-1/2" #2 Stalgard GB 1.000 1/2" 0.400 0.160 2,500

#10 Diameter, #2 Phillips Pan Head

EAX110 #10 - 16 x 3/4" #2 Stalgard GB 0.250 1/2" 0.365 0.130 5,000

EAX120 #10 - 16 x 1" #2 Stalgard GB 0.500 1/2" 0.365 0.130 5,000

#10 Diameter, #2 Phillips Pancake Head

EBN300 #10 - 16 x 1" #2 Stalgard GB 0.500 1/2" 0.435 0.075 4,000

#12 Diameter, 5/16" Hex Washer Head

EAJ185 #12 - 14 x 1" #2 Stalgard GB 0.406 19/32" 0.415 0.200 3,000

EAJ190 #12 - 14 x 1" #3 Stalgard GB 0.406 19/32" 0.415 0.200 4,000

EAJ200 #12 - 14 x 1-1/4" #3 Stalgard GB 0.656 19/32" 0.415 0.200 2,500

EAJ215 #12 - 14 x 1-1/2" #2 Stalgard GB 0.906 19/32" 0.415 0.200 2,500

EAJ220 #12 - 14 x 1-1/2" #3 Stalgard GB 0.906 19/32" 0.415 0.200 2,500

EAJ320 #12 - 24 x 1-1/2" #5 Stalgard GB 0.500 1" 0.415 0.200 2,500

EAJ240 #12 - 14 x 2" #2 Stalgard GB 1.406 19/32" 0.415 0.200 1,500

EAJ340 #12 - 24 x 2" #5 Stalgard GB 1.000 1" 0.415 0.200 2,000

EAJ260 #12 - 14 x 2-1/2" #3 Stalgard GB 1.906 19/32" 0.415 0.200 1,000

#12 Diameter, #3 Phillips Undercut Flat Head

EBN200 #12 - 14 x 1" #2 Stalgard GB 0.406 19/32" 0.415 0.090 4,000

EBN220 #12 - 14 x 1-1/4" #2 Stalgard GB 0.656 19/32" 0.415 0.090 2,500

EBN240 #12 - 14 x 1-1/2" #2 Stalgard GB 0.906 19/32" 0.415 0.090 2,500

#12 Diameter, #2 Phillips Pancake Head

EBN320 #12 - 14 X 1" #3 Stalgard GB 0.406 19/32" 0.435 0.075 4,000

1/4" Diameter, 3/8" Hex Washer Head

EAJ415 1/4" - 14 x 1" #2 Stalgard GB 0.406 19/32" 0.500 0.250 2,500

EAJ540 1/4" - 20 x 1" #3 Stalgard GB 0.406 19/32" 0.500 0.250 2,500

EAJ430 1/4" - 14 x 1-1/2" #2 Stalgard GB 0.906 19/32" 0.500 0.250 1,000

EAJ580 1/4" - 20 x 1-1/2" #3 Stalgard GB 0.906 19/32" 0.500 0.250 1,000

EAJ600 1/4" - 20 x 1-1/2" #5 Stalgard GB 0.500 1" 0.500 0.250 1,000

EAJ445 1/4" - 14 x 2" #2 Stalgard GB 1.406 19/32" 0.500 0.250 1,500

EAJ610 1/4" - 20 x 2" #3 Stalgard GB 1.406 19/32" 0.500 0.250 1,500

EAJ615 1/4" - 20 x 2" #5 Stalgard GB 1.000 1" 0.500 0.250 1,500

EAJ640 1/4" - 20 x 2-1/2" #3 Stalgard GB 1.906 19/32" 0.500 0.250 1,000

EAJ650

[6]

1/4" - 20 x 3" #3 Stalgard GB 2.406 19/32" 0.500 0.250 500

EAJ630 1/4" - 20 x 3" #5 Stalgard GB 2.000 1" 0.500 0.250 500

EAJ660

[6]

1/4" - 20 x 4" #3 Stalgard GB 3.406 19/32" 0.500 0.250 500

EAJ670 1/4" - 20 x 4" #5 Stalgard GB 3.000 1" 0.500 0.250 500

EAJ675

[7]

1/4" - 20 x 5" #5 Stalgard GB 4.000 1" 0.500 0.250 250

EAJ680

[7]

1/4" - 20 x 6" #5 Stalgard GB 5.000 1" 0.500 0.250 250

EAJ690C

[8]

1/4" - 20 x 8" #5 Stalgard GB 7.000 1" 0.500 0.250 150

1/4" Diameter, #3 Phillips Undercut Flat Head

EBN630

[9]

1/4" - 20 x 3" #3 Stalgard GB 2.406 19/32" 0.480 0.100 500

EBN640

[9]

1/4" - 20 x 4" #3 Stalgard GB 3.406 19/32" 0.480 0.100 500

1. The Maximum Load Bearing Length is calculated by subtracting the Minimum Protrusion Length from the Nominal Length of the fastener.

2. Minimum Protrusion Length is the length that allows the hardened steel tip and lead threads to protrude out of the back side of the supporting material.

3. Nominal head diameter is the diameter of the integral washer on hex washer head fasteners.

4. Nominal head height includes the thickness of the integral washer on hex washer head fasteners.

5. Unless otherwise noted, all fasteners are fully threaded. Usable thread length is equal to the maximum load bearing length.

6. Partially threaded fastener with a usable thread length of 1.60".

7. Partially threaded fastener with a usable thread length of 2.60".

8. Partially threaded fastener with a usable thread length of 2.15".

9. Partially threaded fastener with a usable thread length of 1.35".

BI-FLEX