Network Router User Manual

Appendix B
How to Install and Access USB Storage
35
Wireless-N Broadband Router with Storage Link
From the 4. Drive drop-down menu, select an available
drive letter.
Select Drive Letter
Click5. Finish.
Access Mapped Drive
On your desktop, double-click the 1. Computer icon.
Computer Icon
NOTE: If the Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer.
Double-click the mapped drive to access it.2.
Double-Click Mapped Drive
Windows XP
Map a Drive
On your desktop, double-click the 1. My Computer
icon.
My Computer Icon
NOTE: If the My Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer.
In the 2. Address field, enter the server name of the
Router:
\\<server_name_of_Router>
Enter Server Name of Router
The default server name of the Router is WRT160NL. You
can change this name on the Storage > Administration
screen; refer to Storage > Administration, page 20.
NOTE: Another option is to use the IP address
of the Router. In the Address field, enter the local
IP address of the Router:
\\xxx.xxx.xxx.xxx
The default is 192.168.1.1. You can change this
IP address on the Setup > Basic Setup screen;
refer to Setup > Basic Setup, page 4.
A login screen may appear. If prompted, enter your 3.
account user name and password. (For the admin
account, admin is both the default user name and
password.)
Enter Account User Name and Password
User accounts are set up on the Storage > Administration
screen; for more information, refer to Create a User
Account, page 38.