Installation Guide

05
4. AUTO+ MODE: Set the slide switch to AUTO+.The fixture will stay OFF
at daytime and stay low-level brightness (0%-50% brightness to be manually
adjusted)at night when the person leaves or remains stationary for 20-180
seconds(according to the time you set) and automatically turn to 100%
brightness on when human body activity is sensed at night. It turns to the
preset low-level brightness again when the person leaves or remains
stationary for 20-180 seconds(according to the time you set). The factory
preset time is 60s and the brightness is 100%.
SENS - Adjust Sensing Distance: Adjust the “Sens” knob with a flat head
screwdriver(Not Included). Turn clockwise to increase sensing distance,
and counterclockwise to decrease the sensing distance. The factory
preset distance is 10M(Maximum), you can adjust the “Sens” knob to set
it in the range of 3-10 meters.
Flathead Screwdriver
not included)
oPC Aut Aut o+
Time
Low
Sens
Level
+
-
+
-
+
-
Slide Switch (Set to AUTO)
Detail A View
Fig.6
LOW LEVEL - This function is out of work when AUTO mode.