Installation Guide

06
TIME - Adjust Lighting Time: Adjust the “Time” knob with a flat head
screwdriver (Not Included). Turn clockwise to increase the lighting time,
and counterclockwise to decrease the lighting time. For every 1/4 clockwise
rotation, the lighting time increases by 60 seconds. The maximum is 180
seconds.
SENS - Adjust Sensing Distance: Adjust the “Sens” knob with a flat head
screwdriver(Not Included). Turn clockwise to increase sensing distance,
and counterclockwise to decrease the sensing distance. The factory preset
distance is 10M(Maximum), you can adjust the “Sens” knob to set it in the
range of 3-10 meters.
Flathead Screwdriver
not included)
oPC Aut Aut o+
Time
Low
Sens
Level
+
-
+
-
+
-
Slide Switch (Set to AUTO+
)
Detail A View
Fig.7