User Instructions

Issue department
：
Bedding Division
Date
：
2017-08-23
Product Function
instruction
Author
：
Kyle
No：
CB1522
CB.15.22.01
Version： 1.1
Page 4 of 5
4
The backlight of paring LED of remote stops flashing, and the paring led of control box turns off, it indicates that
the code paring is successful;
If fails, repeat all the processes above;
1.10. FLAT function
Press and release the FLAT button on remote，the head and foot actuators moves to lower position(when the
actuator is free, can turn off the vibration motor and turn off the indicator light when press once )，stop when
press any buton；
This function takes effect only by pressing the corresponding button on the remote.
1.11. ZERO G position function
Press and release ZERO G button on remote，the head and foot actuator moves to preset memory position，stop
when press any button；
This function takes effect only by pressing the corresponding button on the remote.
1.12. Bluetooth function
Use the APP to connect Bluetooth to control the control box. For details, see < ORE_BLE_USER MANUAL >;
F
CC Warning
：
Please take attention that changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two