User's Manual

Table Of Contents

OKIMAT 8 Description

69596(c) 11

4. Description

The drives units are powered by electrical motors. The back and leg sections of a bed can be ad-

justed depending on the drive options. The drive is controlled by means of an OKIN controller.

The different drive models vary according to their:

• motor power,

• number of motors,

• optional reset function,

• optional mains cut-off mechanism

• optional Floor lighting

• optional variant with an external switched-mode power supply (EPS),

• different stroke variants,

• integrated RF radio receiver,

4.1 Components

The components have a compact design – with two linear adjusting units and a control unit located

within an enclosed housing. To facilitate the tool-free assembly process, the two sliders on the side

(the shutters) can be removed from the housing.

Figure 3 Main components of the OKIMAT 8 double drive

A Optional snap-in locking device

B Shutters

C Connection socket

D Symbol for head end of bed

E Battery compartment

F Screw-on point for the external floor lighting

(optional)

G Symbol for foot end of bed