User's Manual

Technical specifications OKIMAT 8
12 69596(c)
5. Technical specifications
Power supply (AC)
or
Input voltage (DC)
120 / 230 / 240 V, 50/60 Hz (refer to the ratings plate)
24 V AC – 29 V AC (refer to the ratings plate)
Current consumption under rated load
(AC)
0.63 A AC – 3.15 A AC, depending on mains con-
nection and load (refer to the ratings plate)
Current consumption under rated load
(24 V DC)
Max. 8.0 A DC
Permitted push force Max. 6000 N
Mode of operation
1
under max. rated load. Intermittent duty 2 min./18 min.
Protection class II or III (refer to the ratings plate)
Noise level ≤ 65 dB(A)
Current consumption of all additional drives
2
Max. 8 A DC
Drive type Double drive
Drive options OKIMAT 8, OKIMAT 8+1, OKIMAT 8+2
Protection degree IP20
Stroke 87, 69 (standard), 48, 74, 79, 92
Length x width x height 714 mm x 179 mm x 119 mm
Axle gap distance 581 mm (± 2 mm)
Axle receptacle diameter Ø 25 mm, Ø 34 mm (depending on application)
Weight Approx. 5 kg
Optional: battery-operated reset function
Voltage One or two nine-volt batteries (6LR61)
Optional: Remote wireless version
Frequency 2.40 GHz
Optional: Floor lighting
Light emitted from diodes Laser class 1 (EN 60825-1:1994)
Ambient conditions for operation, storage and transport
Transport / storage temperature From -20 °C to +50 °C (-4 °F to +122 °F)
Operating temperature From +10 °C to +40 °C (+50 °F to +104 °F)
Relative humidity From 30% to 75%
Air pressure From 800 hPa to 1060 hPa
Height < 2000 m
1)
Mode of operation: intermittent duty 2 min./18 min. This means that after the unit is operated with its rated
load for up to two minutes it must then be paused for 18 minutes. The system can malfunction if this pause
is not observed!
2)
No more than two drives may be operated at rated load simultaneously!