User's Manual

OKIMAT 8 Foreword
69596(c) 3
Foreword
Disclaimer and exclusion of liability
DewertOkin is not responsible for damage resulting from:
• failure to observe these instructions,
• changes made to this product which have not been approved by DewertOkin, or
• the use of replacement parts which have not been approved or manufactured by DewertOkin..
 We reserve the right to make unannounced technical changes in the course of our continual
product improvement process!
Creation of a complete operating instruction manual for the entire end product
These instructions are only intended to be used by the end-product manufacturer. They should not
be given to the operator of the end product. The factual information contained within may be used
as a basis when creating the end-product manual.
The warning and danger notices are best suited for use in the end product's manual. However it is
not sufficient to simply follow these notices. You should also carry out an internal risk assessment
for your end product. This can then be used as the basis for the safety notices in your manual.
These installation instructions do not contain all information required to safely operate the end
product. They only describe the installation and operation of the drive as partially completed ma-
chinery.
The instructions are intended for the technicians responsible for manufacturing an end product and
not for the operators of the end product.
Notice for customers in EU nations
German Inspection Authority (TÜV SÜD Product Service) testing label
The construction of the OKIMAT 8 has been inspected by the German Inspection Authority (TÜV).
The TÜV also monitors the production of the OKIMAT 8. The official German TÜV label certifies
this construction inspection and production monitoring.
Figure 1 TÜV label