User's Manual

Declaration of Incorporation
According to Appendix II of the EU Machinery Directive 2006/42/EC
The manufacturer:
DewertOkin GmbH
Weststraße 1
32278 Kirchlengern
Germany
declares that the incomplete machine described below
OKIMAT 8
complies with the following basic requirements of the Machinery Directive (2006/42/EC):
Sections: 1.1.3; 1.3.3; 1.3.4; 1.3.7; 1.5.1; 1.5.2; 1.5.5; 1.5.6; 1.5.7; 1.5.8;
1.5.9; 1.5.10; 1.5.13; 1.6.3
You may only operate this machine after you have confirmed that the end product (into which this
drive will be installed) complies with the Machinery Directive 2006/42/EC.
On request, the manufacturer is obliged to send the special documentation accompanying the
partially completed machinery electronically to the appropriate national institution. The special
technical documents corresponding to the machine have been created according to Appendix VII,
part B.
The following person is responsible for the technical documentation:
Hans-Joachim Heimsath,
Refer to address listed above.
Tel.: [phone]
Kirchlengern, Germany. The 15.June 2015 Dr.-Ing. Josef G. Groß
Managing Director