PhotoKey Quick User Guide Add: 12F, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist.
PhotoKey Contents 1. PhotoKey (Coin Battery CR2032 including) 2. Key Hanger Getting to know the PhotoKey 3. Action Button (For Pairing/Alarm/Capture) 4. Buzzer 5. Battery Holder For first time using : Please take out battery insulating strip from PhotoKey. Add: 12F, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist.
How to replace battery 1. 2. 3. 4. Pull Battery holder 5. 6. Warning: Positive battery terminal have to face down in battery holder. + Into the battery with + terminal facing down to battery holder. Please follow instruction step 5. Battery holder insert to Battery holder is reverse. front of PhotoKey Please follow instruction step 5 and 6. Add: 12F, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist.
How to pairing 7. Please download “KeyGuard” App first from Apple Store. 8. Open the “KeyGuard” App on idevice. 9. App will pop up message and click setting then Bluetooth turned on. And access “KeyGuard” App again. 10. Press both power button and Action Button on PhotoKey until PhotoKey have a beep sound. 11. It will show “Connected” that stands for pairing successful. Add: 12F, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist.
Operating KeyGuard App System Requirement -iPhone 4S or above -iPhone 5 or above -iPad 3 or above -iPad 4 or above -iPad mini or above -iPod touch 5 or above This App requires iDevices that support BlueTooth 4.0 Add: 12F, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist.
How to work PhotoKey Alarm Mode: Distance triggered alarm system that makes an alarm if your PhotoKey and iPhone get separated. Distance Alert trigger Attach the PhotoKey to your key chain. Keep the KeyGuard app to run in the background on your iPhone/iPad. Anytime the PhotoKey and your iPhone/iPad are separated beyond the protection distance setting (Close/Near/Far), the Distance Alert will be triggered and an alarm will sound on the PhotoKey and the KeyGuard App on the iPhone/iPad.
How to work PhotoKey Find Your iPhone or iPad If you want to find your iPhone or iPad and please press Action button on PhotoKey. The KeyGuard App will be beeping about 10 seconds and show Alert message. Action Button Add: 12F, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist.
How to work PhotoKey Find Your PhotoKey If you want to find your PhotoKey and please press alarm button on KeyGurard App. Then your PhotoKey will beeping about 10 seconds. Alarm Button Add: 12F, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist.
How to work PhotoKey Last Location You can find your last device’s location. When your last device disconnect with keychain, you can press location icon. Then you’ll get your device’s location. Add: 12F, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist.
How to work PhotoKey Capture - Break through non-stop snapshot feature Fast remote control camera shooting One click control flip front and back camera Press Action Button Add: 12F, NO.81, Sec.1, Hsin Tai Wu Rd., Xizhi Dist.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.