User's Manual

Dexcom G5x System User Guide
Calibration
97
The remaining steps vary from app to receiver:
1. Letting your device know you need to start the sensor warmup.
2. Following your warmup countdown.
6.7 Loose Transmitter Holder
The transmitter holder should be able to stay on your skin using its own
adhesive.
If the patch peels up, use medical tape (such as Blenderm™, Tegaderm™,
Smith & Nephew IV3000
®
, 3M™ tape) for extra support.
• Tape over white adhesive patch on all sides for even support
• Don’t tape over the transmitter or any plastic parts of the transmitter
holder
• Don’t tape under transmitter holder
• Don’t leave any substance on the skin where you insert the sensor
Figure 4. The Right Way to Use Tape for Extra Support
Image is representational only. Your transmitter may look different.
6.8 Starting Your Sensor Session
If you choose to use both the receiver and the app, each system requires
individual setups (see Chapter 5).
After pairing the transmitter to your display device(s), inserting your sensor,
and attaching the transmitter to the transmitter holder, your next step is telling
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor