User's Manual

Dexcom G5 Mobile System User Guide
Ending Your Sensor Session and Transmitter Session
138
Step What you see What you do
7
Insert sensor and attach transmitter.
See Chapter 6 for more information.
8
Make sure
receiver and transmitter are
connected/paired.
Check
receiver 10 minutes after starting for
Bluetooth icon.
• Solid: Connected/paired
• Blinking: Searching,/not paired
Don’t start a new sensor session until they
are paired.
Summary
Now You Can!
• Identify replace sensor prompts at the end of a seven-day sensor session
• Recognize when you have to end a sensor session early
• Successfully end a sensor session early
o Identify how you can prevent sensor session failures
• Remove your sensor pod with transmitter attached
• Separate transmitter from sensor pod
• Determine if transmitter can be used for another sensor session
• Pair a new transmitter
What’s Next?
Congratulations, you have the basics down!
You can set up your app and receiver, start a sensor session, calibrate, as well as end your sensor session and know when to
replace your transmitter. But the G5 Mobile can do much more.
In the next part, Part 3: Next Steps, you will learn how to get the most out of your G5 Mobile.