User's Manual

Before You Start to Play

After a brief interval, the main page will appear. and VIVO H1 will be

ready to produce sound.

3. Use the [VOLUME] knob to adjust the volume.

NOTE

This unit is equipped with a protection circuit. A brief interval

(a few seconds) after power up is required before the unit will

operate normally.

Turning the Power O

1. Rotate the [VOLUME] knob toward the left position to

minimize the volume.

NOTE

To avoid malfunctions, never disconnect the AC/DC adaptor

while the instrument is turned on.

2. Press the VIVO H1’s [ " ] switch.

A power o conrmation message appears:

3. Press the "YES" Function button to conrm.

The display shows the following message:

and the unit will turn o after few seconds.

If you do not want power o press the "NO" Function button.

NOTE

If you need to turn o the power completely, rst turn o the [" ] button,

then unplug the power cord from the power outlet. Refer to "Connecting

the AC Adaptor" (p. 9).

If you do not operate the unit for a certain period

of time while the power is on, this unit turns o

automatically.

If you don’t want the power to turn o automatically,

turn the “AUTO OFF” setting o !

With the factory settings, the unit’s power will automati-

cally be switched o 120 minutes after you stop playing

or operating the unit.

Shortly before the VIVO H1 shuts down automatically, the

display starts counting down the seconds. If you want to

keep using the VIVO H1 at this stage, press any button.

If you don’t want the power to turn o automatically,

change the “AUTO OFF” setting to “OFF”.

Demo of the VIVO H1

Your VIVO H1 contains a demo that introduces all the best of its tones.

1. Simultaneously press the [ ] and [SONG] buttons.

Playback starts automatically with the demo song.

2. Press the [MAIN/EXIT] button to leave the demo function.

NOTE

purposes other than private, personal enjoyment is a violation

of applicable laws.