User Manual

8
30
1
Turns the power on or o (p. 11).
With the factory settings VIVO S7/S3’s power will
automatically be switched o 120 minutes after you stop
playing or operating the VIVO S7/S3.
If VIVO S7/S3’s power has been turned o automatically, you
can use the [POWER] switch to turn the VIVO S7/S3 back on.
If you don’t want the power to turn o automatically, set the
“AUTO OFF” parameter to “OFF” .
NOTE
To avoid malfunctions, never disconnect the AC/DC adapter while
the instrument is turned on.
2
VOLUME
Use this knob to set VIVO S7/S3’s overall volume.
3
SOUND/MEMORY
These buttons allow you to select Sounds and Memories.
When the [SOUND ] button is active (it's lit), the rst row
select the Sounds families and the second row select the
Sound number.
When the [MEMORY ] button is active (it's lit), the rst row
select the bank of memories and the second row select the
number.
4
SOUND
When this button is active (it's lit), you can select sounds by
the Sound and Number buttons e.
5
MEMORY/WRITE
When this button is active (it's lit), you can select memories
by the Bank (Family Tone buttons) and Number buttons e.
Pressing and holding this button to write a memory..
6
SPLIT
This button enable or disable the split function.
7
LAYER
This button enable or disable the layer keyboard mode.
8
OCTAVE
This button allows you to change the pitch of the keyboard
in steps of one octave.
9
Arrow buttons
These buttons are used to navigate around the various
menus, adjust values.
10
MENU/EXIT
This button allows you to open and close the menu page
where you can view and select all available functions.
11
Function buttons
These buttons are used to select one of three functions/
options shows at the bottom of the display.
12
SONG LEVEL
This knob allows you to set the volume of the song player or
when a parameter is selected it works as Data Entry.
/
11
1316 1415
171819
212223
28
12
20
24
25
26
27
29
3
Panel Description