User's Manual

ManualsBrandsDexibell ManualsKeyboardsVIVO S7 88-Key Digital Stage Piano

Table Of Contents

Important Safety Instruction
Relevant Indications
Panel Description
Connections Quick Guide
Quick Guide
Before You Start to Play
- Connecting the AC Adaptor
- Connecting the Pedals
- Connecting External Audio Amplifier
- Listening Through Headphones
- Connecting Digital Player devices
- Connecting the VIVO S7/S3 to MIDI devices
- Connecting the VIVO S7/S3 to Your Computer
- Connecting an USB Memory (commercially available)
  - Safely Remove the USB Memory
- Installing Music Rest
- Ground Terminal
- Turning the Power On/Off
  - Turning the Power Off
- Demo of the VIVO S7/S3
Basic Operation
- About the Display and Cursor Operation
  - Main Page
- Moving the Cursor and Setting Parameter Values
- Assigning the Name You Specify
Selecting Tones
- Grand Piano Mode
- How to Select Tones
- Most Frequently Used Tones (Favorite Tone)
- Playing Two Sounds Over the Entire keyboard (Layer)
- Splitting the Keyboard Range and Playing Two Different Tones
- Playing the Lower, Main and Coupled Part Splitting the Keyboard Range
  - How to change the Split Point
Additional Sound - USER Sound
- Importing USER Sound Library
- How to Select USER Sound
- Deleting USER Sound Library
Sound Effects
- Going Around Sound Effects
- Adjusting the Sound Effect Parameters
- Adding Reverb to the Sound
Personalizing Your Sounds
- T2L Sound Parameters
- Making Slight Additions or Sound Alterations
Other Functions
- Transposing the pitch of the keyboard
- Shifting the Tuning of a Keyboard Part in Octave Steps
- Performing Musical Chords
  - Chord Enhancer
  - Chord Freeze
- Adjusting the Keyboard Response (Key Touch)
- Adjusting the AUDIO IN Input Level
- Restoring the Factory Settings (Factory Reset)
Practice with Song Player
- Playing a Song
- Useful Song Controls
Recording Your Performance
- Recording Your Music as audio data (WAVE).
- How to Record your Performance over an Existing Audio Base (Overdub)
Working with the Memories
- About the Memories and Memory Set structure.
- Saving Your Settings in the Internal Memory
- Recalling your Settings from Internal Memory
- Saving Your Settings in the USB Memory (commercially available)
- Recalling your settings from an USB Memory
- Renaming a Memory
- Exporting a Memory Set in the USB Memory
- Importing a Memory Set from the USB Memory.
Playing with Audio Backing Tracks
- Connecting your Mobile Device
- Playing with X MURE Application
Wireless Function
- Bluetooth® Audio Connectivity
Master Equalizer
- Real Time Controls
- Master Equalizer Adjusting
- Master Equalizer Preset
  - Saving Your User Preset
Master Keyboard Functions
- Programmable Four MIDI zones
  - Configure the MIDI zones
  - Activate a MIDI zone
- Using the Knobs to Send MIDI messages (TO MIDI)
MENU Options (Advanced Section)
- General procedure
  - SETTING Parameters Group
Appendix
- Effects Types and Parameters List
- VIVO S7/S3 Tone List
Troubleshooting
Specifications
Index
Switch
- Channel
SETTING Parameters Group
- MAIN SETTING
- LOWER SETTING
- COUPLED SETTING
- ZONE 1 SETTING
- ZONE 2 SETTING
- ZONE 3 SETTING
- ZONE 4 SETTING
- KEYBOARD TOUCH
- OCTAVE
- TRANSPOSE
- SPLIT MODE
  - Split Point
T2L EDITOR
EFFECTS
- MAIN FX
- LOWER FX
- COUPLED FX
- REVERB
- MASTER EQ
CONTROL
- DAMPER PEDAL
  - Part
- PEDAL ASSIGN 1
  - Funct.
  - Part
- PEDAL ASSIGN 2
  - Funct.
  - Part
- EXPRESSION PEDAL
  - Funct.
  - Part
- SWITCH 1 ASSIGN
  - Funct.
  - Part
- SWITCH 2 ASSIGN
  - Funct.
  - Part
- WHEEL1 ASSIGN
  - Part
- WHEEL2 ASSIGN
  - Funct.
  - Part
- CONTROL 1 ASSIGN
- CONTROL 2 ASSIGN
- CONTROL 3 ASSIGN
- CONTROL 4 ASSIGN
  - Channel
  - Function
TUNING
- MASTER TUNE
- TEMPERAMENT
MEMORY
USB REMOVE
AUDIO INPUT
- LEVEL
BLUETOOTH
MIDI
- RECEPTION
- TRANSMISSION
- MIDI SET
- SAVE MIDI SET
GLOBAL
- Auto OFF
  - Pedal
  - Switch
- FACTORY RESET
VERSION INFO

Adding Reverb to the Sound

The display shows the Reverb page:

MEMO

You can also select this function pressing [MENU] button

EFFECTS REVERB.

2. Use the [] [] buttons to specify the part you wish to

change the Reverb level.

3. Use the [] [] buttons to adjust the Reverb level.

Changing the Reverb Type

This parameter allows you to specify what kind of reverb eect you need.

1. While the Reverb page is displayed, press the "TYPE"

Function button to access the Reverb Type page.

2. Use the [] [] buttons to choose the Macro Type you

prefer.

The available Macro reverb types are:

Setting

Hall, Dark Hall, Mid Hall, Concert Hall, Large Hall, Chathedral, Arena, Cave,

Chamber, Room, Venue, Ambience, Wooden Room, Brick Room, Studio

Booth, Small Room, Living Room, Oce, Warehouse, Music Club, Plate,

Small Spring, Bright Spring, AmpSpring