User's Manual

38
Working with the Memories
available)" (p. 18).
2. Change all settings the way you want to save them.
3. Press and hold the [MEMORY/WRITE] button until the
display shows:
The list of Internal Memory is shown.
MEMO
You can also select this function pressing [MENU] button
MEMORYWRITE.
4. Press the [USB] Function button to select the destination
memory.
The display shows a list of all les and folders on the USB storage
device you have just connected.
Now you can save:
 In a Memory Set previously saved. Continue from step (5)
 In a new Memory Set. See "Saving in the New Memory Set"
below.
Saving in the Memory Set previously saved
5. Use the [][] buttons to scroll through les and folders
to select the Memory Set.
Memory Set Icon Memory Set le extension
.rif
Use the "OPEN" Function button if you need to enter in a folder.
If you opened a folder by mistake, press the [ ] button to return to
a higher level.
6. Press the "OPEN" Function button to recall the Memory
Set.
The display shows the list of memories in the Memory Set.
7. Use the bank (Sound Families) and number buttons to
select the position you want to replace the Memory.
8. Press the "SAVE" Function button to conrm.
The display changes to:
9. If you want to name your new Memory, see "Assigning the
Name You Specify" (p. 22) for details.
10. Press the "OK" Function button to save the Memory.
The memory will be saved and the list of memories is shown.
Saving in the New Memory Set
1. Press the "NEW SET" Function button to create an empty
Memory Set.
This page allows you to create a new Memory Set List whose name
is selected automatically by the VIVO S7/S3.
2. If you want to name your new Memory Set, see "Assigning
the Name You Specify" (p. 22) for details.
3. Press the "OK" Function button to conrm the name.
The display shows contents of the new Set just created.
4. Use the bank (Sound Families) and number buttons to
select the position you want to write the Memory.
5. Press the "SAVE" Function to conrm.
The display changes to:
A Memory name is suggested by the VIVO S7/S3.
6. If you want to name your new Memory, see "Assigning the
Name You Specify" (p. 22) for details.
7. Press the "OK" Function button to save the Memory.
The memory will be saved and the list of Memories is shown.