User's Manual

54
MENU Options (Advanced Section)
MIDI
[MENU] button MIDI
INTERNAL MEMORY
This group allow you to congure the MIDI parameters. You can transfer
MIDI data between the VIVO S7/S3 and your sequencer software.
Here is a brief explanation of VIVO S7/S3 keyboard parts:
Part Explanation
Main
At power-on, the instrument is automatically selected in Grand
Piano Mode. All keyboard play note in the Main part.
Main Part
Coupled
This part can be combined with the Main part. To do this press
the [
] button. The second part (Coupled Part) play over
the entire keyboard in combination with the Main part.
Main Part + Coupled Part
Lower
This part is activated when you split the keyboard in two
zone: Left and Right. To split the keyboard press the [
] button. The Keyboard is now divided into two sections. The
region of the keyboard to the left of the split point becomes
the Lower part , while the region of the keyboard to the right
of the split point becomes the Main part.
Main Part
Lower Part
1. Select the group of parameters you need (Reception, Transmission and
Global).
 RECEPTION
You can congure the MIDI receive parameters of Main, Coupled
and Lower part.
1. Select the part you want to edit (Main Coupled and Lower).
In the example above we selected the Main keyboard part.
Main, Coupled, Lower
Parameter Setting Explanation
Status
OFF, ON
Default: On
Select “On” if you want the selected part
to receive MIDI data.
Channel
1 ~ 16
Default: 1
Allows you to assign a MIDI receive
channel to the selected part.
Shift
-48~0~+48
Default : 0
This parameter allows you to transpose
the received note messages before
sending them to the VIVO S7/S3’s tone
generator. The maximum possible
transposition is four octaves up (48)
and down (–48). Each step represents a
semi-tone.
Modulation
OFF, ON
Default: On
These lters allow you to specify
whether (On) or note (O) the messages
in question should be received.
Volume
Panpot
Expression
Reverb
Chorus
Hold
Sostenuto
Soft
PG (Program
Change)
PB (Pitch Bender)
Part MIDI RX channel (default)
Main 1
Coupled 3
Lower 2
 TRANSMISSION
You can congure the MIDI transmission parameters of Main,
Coupled and Lower part.
1. Select the part you want to edit (Main Coupled and Lower).
In the example above we selected the Main part.
Main, Coupled, Lower
Parameter Setting Explanation
Status
OFF, ON
Default: On
Select “On” if you want the selected part
to transmit MIDI data.
Channel
1 ~ 16
Default: 1
Allows you to assign a MIDI transmit
channel to the selected part.
Shift
-48~0~+48
Default : 0
This parameter allows you to transpose
the note messages before they are
transmitted to an external MIDI device.
The maximum possible transposition is
four octaves up (48) or down (–48).
Local
OFF, ON
Default: On
You can disconnect the part from
the internal sound source (“O”) – or
re-establish that connection (“On”).