User's Manual

 Power: 5V DC, 100mA MAX connected to host computer
 Dimensions: 75*75*19 mm (without counting the extended USB
connector)
 Weight: 97 grams
ELECTRIC SPECIFICATIONS
 Operating Voltage Transmitter: 2.4 V DC (powered by batteries)
Receiver: 5V DC (powered by USB port)
 Operating Current Transmitter(mouse) : 45mA, operate on a white
Paper
Transmitter(keyboard): 1.5mA
Receiver: 16mA typical
 Standby Current 6mA
 Sleep Current 240uA
 Modulation Type FSK
TROUBLESHOOTING
1. Mouse does not function
 If mouse is not functional, please turn off the computer first.
 Check the receiver and make sure it is firmly attached to the USB
port of the computer.
 Check the placement of batteries and see if they are properly
connecting.
 The
"+" and "-" on the batteries must match the "+" and "-" on the
slots. If the batteries aren't inserted correctly, the device won't work.
 Restart the computer again. If the LED inside the receiver does not
light up when moving the mouse, please re-connect the mouse to the
receiver.
 Q: The mouse cursor can only move left & right during operation (it
could
be caused by low battery or the optical sensor’s data error).
A: Please take out one of batteries and put it back for a power reset
and then redo the connect procedure.
 Q: The mouse does not work after waking up from power off mode
by pressing the connect button once.
A: This might be caused by imprecisely depressing the connect
14