User's Manual

The RF wireless mouse uses 2 AA batteries.
They are inserted as follows:
1. Turn the mouse to the bottom side.
2. Remove the batteries cover by moving the opening
tabs and pull the battery cover out.
3. There are signs to indicate batteries' positive and
negative poles. Follow the signs to place the batteries
4. Place the batteries cover back and make sure it is firmly closed
Insert 2 AA Batteries.
Selecting the ID Channel
The RF wireless keyboard & mouse provide the possibility of 256 different ID
to avoid interference with other users of the same model RF wireless
keyboards or mice. Before using the wireless keyboard and mouse, you must
ensure that the same ID is set for the receiver, keyboard and mouse.
Please follow the steps as below to set up:
1. Turn to the bottom of receiver and you will see a small button (ID
code connection, refer to picture).
2. Establish communication between the receiver and the mouse
(Select identification codes).
 Press and release the connect ID button on the bottom of receiver.
4