User Manual

ManualsBrandsDexin ManualsComputers & AccessoriesCordless Laser Mouse

Table Of Contents

MWL52-P Wireless LASER 5+1 Buttons Mouse

USER’S MANUAL

Model #: MWL52-P

System Requirement

 Mouse compatible with standard Microsoft OS

 4

& 5

side buttons require Windows

, 2000 or XP, or driver installation

 Tilt wheel and the extra hot-key require driver installation to be functioned.

 1

, 2

and wheel are compatible with MAC

 6

button, the dpi switch button, on the top case compatible with standard

Microsoft OS and MAC. No driver request.

Before you begin

 Keep this installation guide for future reference! It contains Important

Troubleshooting Information.

 Keep your old USB mouse as a back-up device.

Getting Started

Congratulations on your purchase of LASER 5+1 button mouse. LASER mouse

is the last technique of mouse industry. The most important feature for LASER mouse

is that can work on most of shining surface and glass. In additional, its high resolution,

1,600 hardware dpi, provides users a great experience to operate.

Package Contains

Your MWL52-P Mouse package includes the following:

1. MWL52-P LASER mouse

2. Receiver

3. Charging USB cable

4. User’s manual

5. CD-ROM Driver for Windows OS

Note：If any part is missing, please contact your dealer for a replacement immediately

Hardware Installation Guide

Step 1. Plug the USB receiver to Computer

1. USB is designed as a PnP device; you can plug the device no matter the computer

is on or off. Of course, you can remove USB device in the same way.

2. If the device is HD or pen drive or any device which can store files, stop the device

than remove is the best way to protect the files.

3. The suggestion is turn on the computer, than plug it.

MWL52-P User Manu- 轉檔用 Page 1 of 8 1.1 Edition

Summary of content (8 pages)

PAGE 1
MWL52-P Wireless LASER 5+1 Buttons Mouse USER’S MANUAL Model #: MWL52-P System Requirement Mouse compatible with standard Microsoft OS 4th & 5th side buttons require WindowsTM, 2000 or XP, or driver installation Tilt wheel and the extra hot-key require driver installation to be functioned. 1st, 2nd and wheel are compatible with MAC 6th button, the dpi switch button, on the top case compatible with standard Microsoft OS and MAC. No driver request.
PAGE 2
Step 2. Waiting for new device detection 1. If your system is Windows ME/ 2000/ XP, windows will find a new device and install standard driver automatically. 2. The standard software only support standard functions and will not support special one of the mouse. Step 3. Insert the AAA battery 1. Turn the mouse up side down. 2. Remove the battery room door. 3. Put 2 AAA batteries in the correct direction. 4. Put the battery room door back. Step 4.
PAGE 3
icon in the CD files.) 2. The setup program will guide you to finish the installation step by step. MWL52-P User Manu- 轉檔用 Page 3 of 8 1.
PAGE 4
MWL52-P User Manu- 轉檔用 Page 4 of 8 1.
PAGE 5
3. After you finish the installation, select "Restart" to reboot your system and activate multimedia hot keys and wheel scrolling functions. Programmable Buttons After installed the driver, a symbol will show in the right hand side of working bar. The Office-Wheel Function is attached on the mouse software. Users can change the default function of wheel and extra hot-keys. The hot-key can be defined by clicking “Control panel”->”Mouse”->”special buttons”. MWL52-P User Manu- 轉檔用 Page 5 of 8 1.
PAGE 6
Mouse setting window Software/ Driver remove Please using “Program add/ remove” icon in control panel to remove the driver. GENERAL SPECIFICATIONS High-tech 650nm LASER mouse Tilt Wheel Multi-channels with 256 ID code/ channel 27MHz RF technology 800/ 1,600 dpi hardware resolution 5+1 buttons design USB charging cable, to charge mouse during operation Low power consumption Right hand Ergonomic design for comfortable grip. Software added-value smart-functions Programmable buttons Compatible with USB 2.
PAGE 7
documentation for the correct port configuration. You may have other system devices (e.g. a modem card) that conflict with the mouse. Check the IRQ/address settings of these devices for conflicts, and change the setting as required. Refer to your computer documentation to make these changes. Determine whether the problem is mouse or system related, try the mouse on a second system or a different mouse on your current system.
PAGE 8
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules.