User Manual

ManualsBrandsDexin ManualsComputers & AccessoriesWireless Optical Mouse

MWP141-P1M 27MHz Wireless Optical Mouse page 1 of 8 1.0 Edition

Wireless 3 Buttons Optical Mouse

MWP141-P1M + RX28-1M USER’S MANUAL

Important Ergonomic Information

Some experts believe that using any mouse or trackball may cause serious injury to hands,

wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, see a

qualified health professional.

TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS:

* Take frequent breaks, get up and walk around several times every hour.

* Vary your tasks throughout the day.

* Keep your shoulders relaxed with your elbows at your side. Position your keyboard and

mouse so you do not have to reach.

* Adjust your chair and keyboard so your upper arms and wrists are straight.

* Avoid resting your wrists on sharp edges.

System Requirement

* Mouse compatible with standard Microsoft OS

* 3rd button and wheel function require Win98/ ME/ 2000/ XP/ Vista

* If your computer’s operating system is Windows 98/ 98SE, please prepare the

Windows98 or 98SE compact disk for system’s request during the installation of mouse.

Before you begin

* Keep this installation guide for future reference! It contains Important Troubleshooting

Information.

* Keep your old PS/2 or USB mouse as back-up devices.

Getting Started

Congratulations on your purchase of an 800dpi Wireless Optical Mouse. By using the

advanced RF technology a 360° operation is possible and no line-of-sight is required between

the receiver and the mouse. The 800 high resolution will bring users the best operation accuracy

and efficiency, especially when the pixel of display over 1024*768 pixel. It operates at twice the

speed and only requires 1/4 of the space in comparison to a 400 dpi mouse.

For travel and loss prevention, store receiver in cavity on the bottom of the mouse,

power will turn off automatically, or by simply pressing the right & left & scroll wheel to turn

Summary of content (8 pages)

PAGE 1
Wireless 3 Buttons Optical Mouse MWP141-P1M + RX28-1M USER’S MANUAL Important Ergonomic Information Some experts believe that using any mouse or trackball may cause serious injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, see a qualified health professional. TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS: * * * * * Take frequent breaks, get up and walk around several times every hour. Vary your tasks throughout the day.
PAGE 2
off power, and low-power indicator on the receiver will blink to indicate battery status makes MWP141 a smart companion for laptop users. Package Contains Your Wireless Optical Mouse package includes the following: 1. The Wireless Optical mouse (MWP141-P1M) 2. Ultra mini USB storable receiver (RX28-1M) 3. User’s manual 4. 2 AAA Alkaline batteries Note：If any part is missing, please contact your dealer for a replacement immediately. Precaution The optical mouse can not work on a glass or mirror surface.
PAGE 3
Overview Hardware Installation Guide (Mouse) Battery installation: 1. Remove the battery compartment cover. 2. Install batteries with the positive (+) & negative (-) in the correct direction indicated by the battery compartment label. 3. Replace battery compartment cover. The red LED on the bottom of the mouse will indicate power to the mouse. Connect the receiver with computer. 1. 2. 3. 4. a. Turn off your computer Disconnect the current mouse Plug the USB connector (receiver) into USB port (computer).
PAGE 4
Synchronize the RF Mouse (Pairing) If the mouse is in sleep mode click the mouse button once to wake it up. 1. Bring the mouse within 1 ft range from the receiver. 2. Power on the mouse. 3. Hold the mouse upside-down and use a pointed object, such as a pen tip, to click the CONNECT button (ID button) once. 4. Click the receiver’s connect button once, within 5 seconds after clicking the connect button on the mouse. The LED will start blinking, when the connection is established.
PAGE 5
gradually from standby mode to sleep mode, if it is not being used. Standby mode – Around 1 second after the mouse stops moving, it enter into standby mode. Sleep mode – If the mouse is left intact for around 8 minutes, it goes to sleep mode and shuts down the sensor to maintain minimum power consumption. No moving operation is possible in this mode. WAKE UP THE MOUSE This mouse can work promptly under standby mode so users might not be able to tell the existence of this mode.
PAGE 6
GENERAL SPECIFICATIONS Ergonomic and enlarge buttons design for comfortable grip. 3 Buttons Wireless optical mouse. 800 dpi hardware resolution. Low power indicator. 1 channel RF Digital Radio Frequency. 2 AAA batteries to operate the mouse. Troubleshooting 1. Mouse does not function If mouse is not functional, please turn off the computer first. Check the receiver and make sure it is firmly attached to the USB port of the computer.
PAGE 7
Move the receiver and the mouse closer to each other so that the receiver is relatively shorter in distance to the mouse than to other 27MHz transmitters. You may need to re-establish the “connection”. Note: Avoid using this device on a metal surface because a large surface of iron, aluminum, copper, or other metal may act like a shielding to the RF antenna of the mouse and the receiver. 3.
PAGE 8
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules.