User's Manual
Table Of Contents
- 2.4GHz Wireless Optical Mouse
- System Requirements
- Before you begin
- When battery power becomes low, battery indicator LED on the top of the mouse will blink when moving or clicking the mouse. The mouse will continue to operate for a period of time depending on usage, but batteries should be replaced immediately.
Hardware Installation Guide (Mouse)
Battery installation:
1. Remove the battery compartment cover.
2. Install batteries with the positive (+) & negative (-) in the correct direction
indicated by the battery compartment label.
3. Clip the battery cover back into place and make sure it is firmly closed.
(Caution: Do not look directly in to the optical emitter. Keep away from young children)
Connect the RX36 -6S receiver with computer.
Plug in the USB receiver to any available USB port or hub connected to your computer.
(Windows will now detect the mouse and install the required drivers automatically).
CLICK ANY BUTTON, YOUR MOUSE IS NOW READY TO BE USED
Note: * During normal use, please make sure that the mouse is no more than 5M away
from the receiver in order to have reliable connection.
DC177-P6S 2.4GHz Wireless Optical Mouse Page 4 of 7 1.0 Edition