User's Manual

DC190_P6M 2.4GHz Wireless Touch Optical Mouse Page 2 of 9 1.0 Edition
Package Contains
Your MWP190_P6M Mouse package includes the following:
1. The wireless Touch optical mouse
2. USB storable nano receiver
3. User’s manual
4. 2 AA alkaline batteries
Note：If any part is missing, please contact your dealer for a replacement immediately.
Precaution
The optical mouse can not work on a glass or mirror surface. Avoid operating this mouse
on a glossy surface; otherwise, this mouse may not operate normally.
For conservation of battery power, it is strongly recommended to operate an optical
mouse on a bright surface with fine texture to obtain lower power consumption of the high
illumination LED. A very dark surface will cause higher power consumption.
For optimal performance, mouse should be no more than 5M away from receiver.
For a better transmission distance, avoid using this device on a metal plate or desktop because
a large surface of iron, aluminum, copper and other metal will act as a shield or ground to the
RF antenna of the mouse and receiver. Operating on a metal surface may shorten the
transmission distance.
If your notebook computer has a metal (contains Al or Mg) case, the metal housing of
the LCD panel will isolate partial radiation of the RF signal from the mouse. This could
possibly result in reducing the distance of transmission when you operate the mouse right in
front of the notebook and when the receiver is connected on the back of the notebook.
However, the RF mouse should work properly while you are operating the mouse just beside
your desktop computer.