User's Manual

ID pairing button
Optical Lens
Push and open
2 AA butteries
The RF wireless mouse uses 2 AA batteries. They are inserted as follows:
1. Turn the mouse to the bottom side.
2. Remove the batteries cover (Upper case) by moving the opening tabs.
3. There are signs to indicate batteries' positive and negative poles. Follow
the signs to place the batteries
4. Place the batteries cover back and make sure it is firmly closed
Selecting the ID Channel
The RF wireless keyboard & mouse provide the possibility of 256
different ID to avoid interference with other users of the same model RF
wireless keyboards or mice. Before using the wireless keyboard and mouse,
you must ensure that the same ID is set for the receiver, keyboard and
mouse.
Please follow the steps as below to set up:
1. Turn to the bottom of receiver and you will see a small button (ID code
connection, refer to picture).
2. Establish communication between the receiver and the mouse (Select
identification codes).
 Press and release the connect ID button on the bottom of receiver.