User's Manual

 Power: 5V DC, 100mA MAX connected to host computer
 Dimensions: 63*22*16 mm (without counting the extended USB connector)
 Weight: 16 grams
ELECTRIC SPECIFICATIONS
 Operating Voltage Transmitter: 3.0 V DC (powered by batteries)
Receiver: 5V DC (powered by USB port)
 Operating Current Transmitter: 45mA, operate on a white paper
Receiver: 16mA typical
 Standby Current Standby1 current: 8m A for 2sec
Standby2 current: 6m A for 8 minutes
 Sleep Current Sleep mode current: 240u A
 Modulation Type FSK
Troubleshooting
1. Mouse does not function
 If mouse is not functional, please turn off the computer first.
 Check the receiver and make sure it is firmly attached to the USB port of the
computer.
 Check the placement of batteries and see if they are properly connecting.
The
"+" and "-" on the batteries must match the "+" and "-" on the slots. If the
batteries aren't inserted correctly, the device won't work.
 Restart the computer again. If the LED inside the receiver does not light up when
moving the mouse, please re-connect the mouse to the receiver.
 Q: The mouse cursor can be moved only left & right during operation (it could be
caused by low battery or the optical sensor’s data error).
A: Please take out one of the two batteries and put it back for a power reset and
then redo the connect procedure.
 Q: Mouse does not work after waking up from power off mode.
A: This might be caused by not very precisely depressing the connect button to
wake up the mouse. Users can gain back normal operation by pressing connect
button on the mouse first, and then pressing the one on the receiver. As soon as
the LED inside the receiver starts flashing, the mouse is ready to operate.
! Optical sensor mouse functions best on surfaces with details for tracking. It may
not function well, on a reflective, reflective pattern, or non-visible detail surface!
7